Only half the picture is printing? - Kodak EASYSHARE Plus Series 3 Thermal Photo Printer

Only half of the picture prints on my selphy cp 730 canon printer

it is probably set to print a certine size of the photo, can you do a print preview before printing and see what that looks like, then check all your print settings.

Your paper size may be samller then the size of the image you are printing. Try changing the size of the image or size of paper to match.

reviews.cnet.com/...photo-printers/easyshare-printer-dock.../4505-13252_7-30471124.html

Most of these issues are caused by drivers in the computer that are not agreeing with the pritner.

I would doubt its something hardware as its prting half.

it also could be a setting.


let me know

Thanks please do leave ratings and feedback

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Kodak 500 thermal printer is printing half the picture and everything else is fine.

Does the test print also print only half of the printer? If so, give Kodak a call - bad printer
If the test print works, try changing the usb cable.

help

Try printing a testpage just press print + cancel and make sure you have a paper loaded

You have to rotate the pictures 90 degrees if they are landscape before printing.