Oven won't turn on, has error message, 2 of them... 1st is E0 2nd is F2

Question edited for clarity. Please always include Maker and (what it is)'.

Mainboard control Issue. It can sometimes be fixed with a Power Reset.

F2 E5 - Electric Range - Product Help

KitchenAid https://producthelp.kitchenaid.com > ... > Starts with F2
Dec 14, 2019 - Power unit up by turning on the circuit breaker(s). Monitor the oven for one (1) minute to ensure the error code does not display again. Verify ...

Missing: KGRT607HW4 ‎' Show results with: KGRT607HW4

F2 E5 - Wall Oven - Product Help

KitchenAid https://producthelp.kitchenaid.com > ... > Starts with F2
Dec 14, 2019 - Power unit up by turning on the circuit breaker(s). Monitor the oven for one (1) minute to ensure the error code does not display again. Verify ...

Missing: KGRT607HW4 ‎' Show results with: KGRT607HW4

I have a Kitchen Aid oven that is giving me an E5 and F2 and

JustAnswer https://www.justanswer.com > Appliance Repair
Aug 16, 2020 - Select the 'cancel' function and wait 60 seconds. If error code reappears then replace the touch pad, or touch pad and control board (clock) if ...

1 answer · Top answer: Manufactured August 2006. Your friend was correct. Only 14 years old
Missing: KGRT607HW4 ‎' Show results with: KGRT607HW4

What are error codes E5. F2 - Q&A

Best Buy https://www.bestbuy.com > site > questions > question
Jan 17, 2019 - F2-E5 - Cancel Key Line Open - Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure.

F2 is generally an error indicating a bad sensor probe- it should read about 1100 ohms at 72 degrees F Help Me Find My Model Number RepairClinic com

If you have a Whirlpool oven, the F2 E6 error means that the Cancel key line is open. You will need to replace the keypad or the keypad and controller board (if a single assembly) if the keypad doesn't respond to a press of the Cancel Key.

I hope this helps.

Cindy Wells

good day,
hope this link below will solve your problem.

ovens

F2 is a bad temperature sensor.
The no lights function is a bad clock control.

Replace the oven temperature sensor.

Hi MaryB,

F2 error code means that the oven temperature is too hot. You will have to replace relay board if faulty. Check and replace oven temperature sensor (RTD). If failure repeats, replace ERC (electronic range control or clock).For replacement part you may contact Sears at 1-800-252-1698; M-F 6:30 AM-10:30 PM - Sat 7:00 AM-9:30 PM - Sun 7:30 AM-9:30 PM - All times Central.

Hope this helps.

Thank you for using FixYa.

its your temp sensor. replace it and it should fix ur prob
F2=overheat
is your bottom element connected?

These are the F2/F3 error codes for a Tappan oven
F2 Oven too hot Check Bake function, if OK, replace oven temperature sensor F3 Oven temperature sensor open Check oven temperature sensor, should be ~1100 ohms at room temperature. If too high or low, replace oven temperature sensor
please take the time to give this solution a fix ya rating.

clarkco

Hvace, F2 is a shorted temperature sensor. Probably took it out with the self clean...Catriver..post back.