Tappan Ovens - Recent Questions, Troubleshooting & Support


Look for screws to take off perimeter flange then look for screws attaching the oven to sidewalls. It may be a bit of a grunt pulling the oven out.

Tappan Ovens | Answered on Dec 29, 2020


Don't know about your gas oven, but we have a Tappan wall oven (electric) that we want to get rid of. Maybe you could get the door hinges and spring from it? We are in East Tennessee.

Tappan Ovens | Answered on Dec 09, 2018


that ignitor should lite the flame within 40 to 60 seconds if not the ignitor is bad.even though it glows red it doesn't mean it's good it works with amps change the ignitor

Tappan Ovens | Answered on Dec 23, 2017


great on the info but what is your question

Tappan Ovens | Answered on Apr 29, 2017


You need to measure the opening in the cabinets and then find an oven close to those specifications. More than likely you will have to do some cabinet work as ovens generally are not the same size.

...

Tappan Ovens | Answered on Jul 11, 2016


Built in ovens come in three standard widths, 24, 27 and 30.

Look at the installation guide in the link for a sears for the 24 inch and confirm the width of your opening along with the depth. Make sure the new does not exceed your dimensions..

The problem is usually in the height. There is a lip that extends outside the inside dimensions so the over all width and height need not to extend beyond you cabinet. You can jack up the bottom with spacers to minimize any upper gap.

http://i.sears.com/s/d/pdf/mp-tc/10031951/prod_1502240512

Tappan Ovens | Answered on Jan 13, 2016


Thank you for your post, friend!

I understand that your Tappan stove is coming on and off randomly. It sounds like a possible issue with the switches or control panel. I would recommend seeking assistance from a professional technician for proper diagnosis and repair. I hope this is helpful. -Matt

Tappan Ovens | Answered on Oct 14, 2015


Ours has a little screw on one side of the oven control . I take the knob off and the screw is right there
I use a little thermometer to get the proper heat don't turn much at a time or you will be way out.

Tappan Ovens | Answered on Jul 03, 2015


The big side oven works but the small side don't how to work it

Tappan Ovens | Answered on May 09, 2015


try RepairClinic.com they may have the parts and delivery has been good for me.

Tappan Ovens | Answered on Dec 03, 2014


Hello devon, thank you for your post!

I understand that you need the location of a reset button on your Tappan range. Typically, there is not a reset button for your range. A reset can be done by disconnecting power from your appliance for ten minutes. I hope this information is helpful. -Matt

Tappan Ovens | Answered on Oct 31, 2014


Element is burnt out or thermostat is faulty

Tappan Ovens | Answered on Aug 31, 2014


You would need to confirm it properly cause the elements could as well be faulty. Thank you.

Tappan Ovens | Answered on Aug 30, 2014

Not finding what you are looking for?
Tappan Logo

183 questions posted

Ask a Question

Usually answered in minutes!

Top Tappan Ovens Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23553 Answers

ADMIN Canada
ADMIN Canada

Level 3 Expert

36670 Answers

Are you a Tappan Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...