My printer says memory card error when I put in my camera memory card

Some times it happens next time you may turn off the printer first before removing the memory card from it :
Dont worry u can format it and use it again

If using the Card Reader -

The HP all-in-one has detected an error with the memory card.

1. More than one memory card is inserted in the HP all-in-one.

2. An incompatible camera is connected through the camera port.

3. A memory card is inserted and a digital camera is connected at the same time.

Solution:

Remove and reinsert the memory card. It may be inserted incorrectly. If the problem continues, the memory card may be defective.

Remove one of the memory cards. Only one memory card can be used at a time.

Check the user guide that came with the camera to see if it supports PictBridge. If it does not, try using the cable that came with the camera to connect the camera to the USB port on the back of the HP all-in-one instead of to the HP all-in-one camera port. If the camera does support PictBridge, make sure the camera is set to PictBridge mode. See the user guide that came with the camera for instructions on how to do this.
Remove the memory card or disconnect the camera. Only one can be used at a time.

You might try the following - Reformat the memory card in the camera or format the memory card in a Windows XP computer by selecting the FAT format.
Hope this helps!

Hi there,
The camera port only supports USB-equipped digital cameras that support Pict-Bridge. If you attach a USB device that is not compactible digital camera (or Bluetooth adaptor) to the camera port, an error message appears on the color graphics display. If you have an older HP-brand digital camera, try using the USB that came with the camera. PLug it into the USB port on the back of the HP-all-in-one and not into the camera port near the memory card slots, This works with HP digital cameras only.
By default, Windows XP will format a memory card of 8 MB or less and 64 MB more with the FAT32 format, Digital cameras and other devices use the FAT (FAT 16 or FAT 12) format and cannot operate with a FAT32 formatted card. Either format your memory card in your camera or select FAT format to format your memory card in a Windows XP PC.

Hope this helps.
Thanks.
Have a good day.

Take out memory card from camera, turn it On and check does it show format error?
If yes, press Home, Memory option and format internal memory.
If camera does not show format error then put back memory card in and press Home, Memory card option and format it.
This will delete all files/ data and will refresh memory card, take some pictures and check.
If after formatting, still format error exist, put new memory card.

Try formatting the memory card

Did you format the card before using it on your camera? Try using a memory card reader instead of the printer's SD card slot to transfer the video. Also check if the memory card is locked (check the position of the yellow slider at the right side of the card). If this does not work, then you will have to format the card. Unfortunately this will erase all the data in your card.

That happened when I used a SDHC card. I can only download the card using the lead that came with the camera What card do you have/Do other cards work?

Hi

1. 1 Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com
   
2. 2 Open up 'My Computer'. You should see it under the list of available drives.
   
3. 3 Check its contents first to make sure that you have the right drive.
   
4. 4 In 'My Computer', right-click on the drive and choose 'Format'.
   
5. 5 Leave all the options as they are and click on 'Start'. This is a non-reversible process so make sure this is what you truly wanted to do in the first place.
   
6. 6 Once the process is completed, take the memory card out and insert it into your Digital Camera or any other device. Try to browse to it to make sure it works fine now.
   

A card access error may indicate that an xD-Picture Card memory card is in a write-protected condition. xD-Picture Card memory cards have a special protection feature to ensure that your pictures are kept safe. NOTE: During this condition, you can still use the printer for printing and saving photos from the xD-Picture Card to a secure location, such as the computer hard drive. To resolve this error, try the following:

• Reinsert the xD-Picture Card memory card into your camera and turn on the camera. In most cases, the camera automatically makes the necessary changes.
• Reformat the xD-Picture Card memory card. See the documentation that came with your camera for instructions on reformatting the memory card. Note that this process erases the pictures currently saved to your memory card. To save these pictures, transfer them to the computer before reformatting the memory card. Once you reformat the memory card, transfer those photos back to the memory card using the computer.

From what read of the specs, the C6100 does not support SDHC cards, only SD cards. SD cards top out at 2GB; what you have is technically an SDHC (High Capacity) card, which does not work in SD devices.