20 Most Recent
Behringer Europower PMP3000 12-Channel Powered Mixer Questions & Answers
if this is true on all right channel inputs and not just one you tried , then id look at your effects loop send jack , there is a tiny switch inside it that must reconnect the right side send back over too main right channel fader in the older units there was a switch on back that did this but in later units this function was done with a micro switch inside jack
Behringer...
•
Answered
on Sep 23, 2015
Sounds like a ground issue. Have you tried another cord?
Behringer...
•
Answered
on May 14, 2018
Power supply issue that will wind up with no turn ons
Behringer...
•
Answered
on Aug 25, 2017
No, it's a remote control for X-32 digital mixer.
Behringer...
•
Answered
on Oct 20, 2015
Install all necessary audio drivers on your PC.
Connect the unit to AC power.
Connect the unit to your pc via either USB 2.0 or firewire serial bus.
Press and hold the DIGITAL SELECT button while powering the unit on to switch the bus mode from firewire to usb and vice versa.
Behringer...
•
Answered
on Oct 20, 2015
Have you tried going up on Behringers web site? You can google the part number.
Behringer...
•
Answered
on May 07, 2014
Not finding what you are looking for?
