Xerox fault 37,004.40 : 134924 - Xerox Phaser 8400 Laser Printer

Try disabling it.

4112 / D95 families - Fault Code 077-313 : Multi-Feed Sensing Problems. First ... You have the choice to disable the Multi Feed Sensing feature on the machine if you fail to repair the problem or if you have a hard time sourcing the sensor or the board. The NVM Setting code is: 742-268.

4112 / D95 families - Fault Code 077-313 - The Parts Drop

The Parts Drop https://www.partsdrop.com > index.php > 4112-4127-d9...

Fault Code 077-313: Oversize High Capacity Feeder Fault

Xerox https://www.support.xerox.com > en-us > article
Sep 21, 2015 - Fault Code 077-313: Oversize High Capacity Feeder Fault · Try these solutions · Did this help?

Error Code Xerox 4112 Error 077-313

Copytechnet https://www.copytechnet.com > ... > Xerox
Sep 6, 2019 - Cause: Multi Sheet Check Sensor Actuator loose due to torsion spring disconnected from the arm. Due to improper removal of paper jam at Registration Roll.

Jamming Error 077-313 and error 075 - 211
Nov 30, 2016
Xerox 4127 cp error 077-313
Sep 24, 2016
Error Code xerox 700 077-311
Jan 11, 2021
More results from www.copytechnet.com

Question edited for clarity.
Please don't type in all CAPS, it is considered SHOUTING which is rude and it makes it harder to read. Lower case additions are mine!

You need a service call

Error code 045 315 - Customer Support Forum

https://forum.support.xerox.com > Hardware > Error-co...
Nov 29, 2021 · 2 posts
Please take a look at this article about the Fault Code 045-315 in the online support for your machine. Please consider contacting your support ...

• 
  

  Fault Code 045-315: Video Line M Fault - Support - Xerox

  https://www.support.xerox.com > en-us > article
  Sept 21, 2015 - Fault Code 045-315: Video Line M Fault · Try these solutions · Did this help?

Error Code 045-315 - Copytechnet

https://www.copytechnet.com > ... > Xerox
Oct 18, 2019 - Check, replace Y M Ros unit. Or replace bad MCU pwb.
Xerox 700 error code 045-315
Sept 8, 2019
xerox 700 error code 045-316
May 31, 2019
Error Code Xerox 700 Fault Code 045-360
Sept 25, 2017
Xerox 700 Help please
May 20, 2017
More results from www.copytechnet.com

Xerox 700 color press error 045-315 - Color Printing Forum

https://www.colorprintingforum.com > threads > xerox-...
Aug 17, 2013 - I believe that error is referenced as being a YM (yellow/magenta) ROS assembly fault. This is the black box laser mirror assembly. xfactor ...

Fault Code 092-315: ATC Fail [K] (Black Toner)
https://www.support.xerox.com/en-us/article/en/1244657.html

http://www.manuals365.com/swf/fuji+xerox/ag-c560p_c550p.html?page=207

You may want to ask on a Xerox forum:

https://printplanet.com/forum/digital-printing/digital-printing-discussion/10293-xerox-700-error-fault-codes

http://forum.support.xerox.com/t5/Printing/Xerox-700-061-329-error-code/td-p/210790

Hi I can gave you some error codes but this all I can do hope it be of help to you.
8,009.4x:CAP_FAULT_MP_NO_ CLUTCH_STALL:

• The media path motor has stalled while moving without the clutch engaged.

33,001.4x - TM_DEV_FAULT_MPT_WIDTH_VALUE_TOO_LOW

• Tray 1 status:

1. Check the wiring and connectors from the front door to the I/O board.
2. Run the Test Tray 1 Width Sensors.
3. If the test fails replace the front door.
4. Replace the I/O board.

08.055.44:

• The media path drive module has stalled while engaging the head tilt.

37,008.44:

• The Preheat preheater is not drawing the expected power from the supply.

Run the Preheat Heater test, check the wiring. If test fails and no apparently problem is evident, replace the preheater.

05,002.42:

• Problems with the Y-axis. It could be the belt,motor or the drum.

7,008.4x: PM_FAULT_HEADTILT_NOT_ ENGAGED

• The printhead tilt is not engaged, so it didn't tilt back properly or the printhead is stuck in the tilted position by the tilt lock arms. The process motor gear train getting out of sync can also cause this error.
  

1. Try rebooting the printer.
2. Check for an obstruction or damage in the process gearbox.
3. Ensure the gears are correctly aligned and homed. If faulty replace the process gearbox
assembly.
4. Run the Tilt Axis Drive test to test the headtilt.
5. Run the Head Maintenance Wiper Clutch test. If the test fails, replace the wiper drive clutch.
6. Run the Wiper Axis Drive test.
7. Replace the exit assembly.

7,010.4x: PM_FAULT_HEADTILT_HOME_ERROR

• The printhead is stuck in the tilt position by the tilt arms. The process motor gearbox being out of sync can also cause this error.
  

1. Reboot the printer.
2. Verify the lock arms rotate correctly.
3. Check for spilled ink around the printhead.
4. Check the process motor gears for damage. Ensure the process gears are correctly aligned and homed.
5. Verify the process gear box, process shaft, and drive module shaft are at home position.
6. Verify the headtilt gear will engage, see the home positioning procedure on page. You can manually engage the headtilt gear.
7. Run the Tilt Axis Drive test.
8. Run the Process Motor test.
9. Run the Head Maintenance Clutch test, if the test fails replace the clutch.
10.Run Wiper Drive test. If this fails inspect the wiper drive system.
All The Best: Pineworks

Hi abonk:
This is your problem.

37,004.4x - PEST_FAULT_RESERVOIR0_HEATER_DISCONNECT
PEST - Reservoir0 Disconnect Reservoir0 is not drawing the expected power from the
supply.
1. Run the printhead Reservoir Heater test.
2. Verify printhead wiring.

Your preheater needs to be replaced.
Xerox Preheater Part # 119641980
This part will have to be replaced by a certified Xerox technician.
Hope this helps

37,004.40: PEST - Printhead Reservoir 0 disconnect. Reservoir 0 is not drawing
the expected power from the supply.

One of the printhead cables may have come partially unplugged. Also, an ink spill on the circuit board could lead to this problem.

**** u faiz go to hell or go to mr abdullah alsunbry to **** u

hehehehehehhehehheehhehheehhhehhehhehhehehehehehe

There are very very few parts spared for that feeder.
You can try looking up The Parts Drop on google, but I don't know if they carry any parts for that scanner.