F12 Error How do I fix and reset an F12 error

Protherm Lynx Combi F12 Error - Low Voltage Fault.
Jun 22, 2016

Combi Fault Codes - Installation - Tesisat.org

..

dell.com has this answer, we are not dell.
all 2000 errors are in the manual for errorss.
146 means.
hdd error, hard drive.
what you do is use F12 ePAS diagnosics.
power on
hammer f12 key
ePSA screen POP'ss
the click "through test"
the deselect all test but HDD
and run it, it will fail, because your unstated PC has a bad HDD.
then you will ask hot to fix bad hdd, answer replace it.
new HDD and a new OS.

all 2000 codes here

https://www.dell.com/support/article/us/en/19/sln116413/running-epsa-built-in-diagnostics-on-your-alienware-system?lang=en

every one.

F12 is a problem with the heating element if you not sure on have to check it, u migth want call a appliance tech to fix it ok

Keyword Ranking Analysis for ARISTON OVEN FAULT ...

www.webstatschecker.net/stats/keyword/ariston_oven_fault_code_f12
Keyword Ranking Analysis for ARISTON OVEN FAULT CODE F12 ... fixya.com.Ariston Technologies Ariston AWD120WH - "F12 error code" issues

Sony eSupport Error Operating system not found or missing operating system

Hi

The code F12 means the following:

F12 - No mixed fill. It is likely that the water is not turned on at the taps.

Also Error code F12 is indicating a communications error between cards; Error code F12 is indicating a communications error between cards, this can be caused by one of several things. A problem with bad connections, if you can remove and then replace the plug on connectors, check for loose or chafed wires to motor, they can chafe due to tightness of wires, particularly down to the motor.
It is an electrical problem as opposed to a mechanical one.

Please get back to us if you have further query else please accept the suggestion.

Thank you for contacting fixya.com

Hi,

What happens after you press f2 or f12? Usually if it gets stuck on lenovo logo it means that there is something wrong with BIOS so you need to reset it. But if happens that it gives you error message after that window it could be a OS error or it could be the HDD is bad.

F12 - Communication error a thing to try is resetting the machine to do this turn machine off at plug for 5 mins then back on and start a cycle and see if it happens again. hope this helps.

F12 is classed as a communiction error.
Either faulty connections or electronic panel

Is this a model 110.47512601 HE2 Plus? If it is, I do not see an F12 error code listed. I have a tech sheet for an HE2 Plus, but I only see an F21 error code.

There is a tech sheet inside your washer that explains all the error codes. You will have to remove the lower panel under the door to access it. Its usually mounted to the inside of the lower panel on along the interior walls of the cabinet. There will be instructions on how to enter diagnostics mode and a full list of error codes, followed by procedures to follow on how to correct. If you require further assistance in determining the source of the error, please let me know.

PS Don't tell Sears I told you where they keep their "secret" error code list. Don't you find that irritating? The repairman would have come to your home, opened the washer, and read the tech sheet right in front of you - then charged you for it. Good luck.