Extension call I posted this once already not sure if posted in the right place. Anyway, our intercom works fine to call an extension within office, but it rings. I don't want it to ring. We had a problem about a month ago with calling extensions not working and had a tech come out and reprogram and now when we call ext it rings and before it didn't. Any suggestions??

What happens when someone tries to call you ?? Does it blink on the intercom key ? Are you sure they're dialing the right extension number ? Go to your phone, dial FEATURE *0 and then press the intercom key. It'll tell you the extension number of that phone.

Other than DO NOT DISTURB (feature 85 = on, Feature #85 = off) there's nothing that would stop a phone from getting an internal call.

Make sure you do NOT place the call on hold before doing a transfer. While on the phone, press transfer then the extension, once done simply set the receiver down and it will transfer. If the person at the other extension does not answer and you have no voicemail system, it should ring your extension back.

Do you have DSL on this line? Make sure you have filters on the lines going to the phones or take the line coming out of your DSL modem and split it to the phones.

Also, try unplugging your fax, computer modem or credit card machine and test the intercom. Sharing one line for several devices can make the intercom unhappy.

To program a page button for other extensions.
At the phone, press Feature 00
press the LIGHTED button you want to program.
press the LEFT intercom button, followed by * (star) and the 2 digit extension number.
Repeat for more buttons.
Feature 00 when done.

Now you can just press the button, and it dials intercom *10 (example)

it will activate the speakerphone and you can talk.

On extension 10 or 11
Press Feature 00
Left Intercom, Left Intercom, Right Intercom
Input your first extension that you want to ring.
Press desired line to ring until display say Immideate.
Press Right Intercom for next Extension.
Cheers.

Yes you are doing it right, but make sure when programming a button with another users extension, you are pressing the LEFT intercom button.

Feature 00
press the button to porogram
LEFT INTERCOM 13
feature 00

that programs extension 13 on that button....

From extension 10 or 11

Feature 00
Left intercom
Left intercom
Right intercom
enter the extension you want to modify
press the left intercom
Enter the name.
When finished, press feature 00 to exit programming.

From extension 10 or 11.

Press feature 00
Press left intercom twice
Then right intercom once.
enter your extension number

You will see the lights blinking green on the phone, where your lines are. Touch them until they are solid green. If you want to program another extension, press the right intercom button again and enter the new extension number.

Once done, press feature 00 to exit programming.

As far as the caller ID, there is no way to turn it off on the Partner system. My guess is the provider isn't sending caller ID.

Yes, you just need to program those buttons on your phone. Press "feature" then "redial" then press the button you want to program, then press "1" then it's extension # (example: 1-0-0 to program the button for extension 100) then press "feature". After you've programmed those extensions, the intercom should work.

From Ext 10 or 11.
Feature 00
Left intercom
Left intercom
Right Intercom enter extension number
right intercom.
Enter the name