20 Most Recent
Questions & Answers
Light still blinking after clearing voicemail on nec phone system
You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.
Need more rings
You have to change the rings from the voice mail server. If you don't know your way around the server, its best to get a local NEC tech although it is fairly simple to navigate. Depends on your skill. Typical default password for the server is NEC
How to change the main greeting
The system administrator has access to the voice mail part of the system, can go in and select the bin where the message is saved, then re-record it.
Does not ring
If you recently dialed 4-0 or 4-1, those are Do Not Disturb and Call Forward codes. if this is what happened, then dial the cancel code for both, which is 4-2. This is with internal dial tone, don't grab an outside to do this. You could have someone dial your extension to test if the ringer is faulty. if their call comes in as voice announce, have them add a 1 to their dial sequence and their call should switch to audible ring, and you will know it's not a ringer issue. Adding a 1 can be done continuously if you want to switch back and forth.
How do I change the names on the stations?
it depends on your type of phone system. On an Elite IPK system you need to enter program mode from x100 or x101 then goto function 4/18 per port and assign names. transfer key saves.
need help remote billable support at www.ldtsnj.com
Not finding what you are looking for?