Braun novamatA-M monitor troubleshoot - Braun Health & Beauty

This is a blood pressure monitor, not a camera. When it says err it means an error has occurred. If you consult the manual it should give you further information - if not, contact the nearest Braun service centre to where you are,

Mr Google suggests:

1. Braun Service Centre Directions
2. Appliance Repair Service
3. Address: 3, 1St Floor, Navjivan Society, Lamington Road, Mumbai, Maharashtra 400008, India Phone:+91 22 2305 1554
   
4. Write a review

These links should help:

Braun Replacement Parts Braun FactoryOutletStore com

Braun shaver charging base

http://braun.shavers-and-parts.com/

Featured Braun Shavers and other Braun Shaver Replacement Parts

I checked, and, unfortunately, they don't have instructions for your model.
Kaz has taken over Braun's BP monitor business, and one of the models' instructions says to have it seen by a servicer if it keeps displaying an error message. You can find one by calling:
Customer Service Information - North America 1-800-327-7226
You can also send email inquiries to [email protected].
Website: www.kaz.com/braun

Good luck, and I hope this helps!

I checked, and it doesn't look like they're still selling your model. Kaz has taken over Braun's BP monitor business, and one of the models' instructions says to have it seen by a servicer if it keeps displaying an error message. You can find one by calling:
Customer Service Information - North America 1-800-327-7226
Website:
www.kaz.com/braun

Good luck, and I hope this helps!

this is maual for 6022 Braun Thermometer Owner Manual ManualsOnline com

take off battery enclosure and there is small button named "select"hold it until you hear beep, then you can change settings.with I/O button you can change value, with select go to next settingpress mem to save settings and hold select to discard them
trogper

B braun syringe pump perfusor compact showing error 063 plese give me answer( what is amalfunction part )

From the manual of the thermometer:

This thermometer is shipped with the Fahrenheit temperature scale activated. If you wish to switch to Celsius (°C), proceed as follows:

• Turn on the thermometer. (If it is already turned on, make sure it is not in memory mode.)

• Press the /mem button and keep it pressed. Then press and release the activation button to switch over to the «change temperature scale» mode.

• By pressing the activation button again, the Celsius scale is activated, «°C» is displayed on the LCD. Each further pressing of the activation button toggles the scale between °C and °F.

If this isn't the right manual, go to: http://braun.kaz.com/kaz/service and select your country from there.

call himor her and ask them you going to be late