My Kenwood HM-331 MICOM part No. M30622MA-527FP had burned out. The dealers cannot supply as the part is discontinued. Need the replacement part. Where else I can get, any ideas?

Take your pick :>D

https://manualzz.com/doc/24514755/a901e-repair-instructions

https://www.manualslib.com/manual/1239313/Kenwood-Hm-901.html

https://www.google.com/search?q=Kenwood+a+901+repair+manual

..

If you do not know what you are doing it is better to throw it away and get a new one. You could get electrocuted if you try yourself. Probably cost more than a new one to get someone to repair it.

Unfortunately the product is discontinued and replacement bowls are no longer available. The part number for the bowl you need is "B151". I need one myself, and searched for one but did not find it anywhere. Don't waste money buying other bowls because they will not work properly, even if they seem to fit.

Check your brushes on the motor, if they are good then its the windings that are burning out.

Mezo.

the Laser assembly in the Player Mechanism could be dirty.....if so you can access this by removing the external covering and gently swabing the lense with a Q-Tip lightly moistened with a small amount of alcohol.

also make sure the disk is pretty clean....some CD players seem to be sensitive to even the slightest imperfection in the disk.

The vibrations from your speakers are too big so it makes your CD skip (try moving the speakers farther away from your radio)

it's probably a 12 volt center tapped a/c transformer,you could look on old unit transformer and see if this is the voltage output, then go to any electronics parts store and get a repl trandformer rated at 12v.a.c. and is center tapped at least 1 amp cuuent output

This is just an information, informing you regarding the signal which is 1 bit (in computer language) and D/A refers to Digital to Analog dual converter.

I burn CD's on my laptop connected to a HM-33 through the earphone out plug. You have to change the computer's system input sound preference from "system" to "Audio in". Stereo sound quality is excellent.

Try unplugging unit for 24 hours then, retry. Unit may also have problem in standby circuit, have serviced