Printhead Loose or missing. Install printhead or ink cartridges.

If the ink cartridges and printhead are already in the printer, remove them, then reinstall them.

1. Remove the color and black ink cartridges.
2. Remove the existing printhead by lifting the latch in the center of the carriage. ...
3. Close the printer access door. ...
4. Follow Step 2 above to install the printhead and ink cartridges.

http://support.en.kodak.com/app/answers/detail/a_id/1309/~/error%3A-printhead-is-missing%2C-not-installed-correctly%2C-or-has-come-loose http://www.fixya.com/support/t26068323-its_telling_me_print_head_loose_or

Error: "Printhead Failure" (105-3802) - Kodak

support.en.kodak.com/.../error%3A-printhead-failure-(105-3802)

KodakAug 25, 2010 - How do I resolve the error message "Printhead Failure" (error code ...If you are not prompted to calibrate the printhead, turn off the printer, wait ...

Error: "Printhead is missing, not installed correctly, or has ...

support.en.kodak.com/.../error%3A-printhead-is-missing,-not-inst...

KodakAug 25, 2010 - How do I resolve the error message "Printhead is missing, not installed correctly, or has come loose" (error code 105-3513) on my ESP or HERO All-in-OnePrinter? ... If the printhead and ink cartridges are not installed in the printer, install them: ... If the error continues, restart the printer and try to print.

To resolve this error:

1. Open the printer access door.
   Disconnect the power cord
2. Remove the color and black ink cartridges.
3. Remove, then reinstall the printhead.
   • Unlatch the printhead:
     
     press the button in the upper-left corner of the carriage.
     
     
     
   • Lift the printhead out of the carriage.
   • Place the printhead in the carriage.
   • Press firmly against the target label on the printhead until it clicks into place.
     
4. Install the color and black ink cartridges.
5. Close the printer access door.
6. Connect the power cord.
7. Then follow the instructions on the LCD screen

Go to the Kodak site
Visit the page to download latest firmware
Install firmware

Printhead is faulty > Needs to be replaced

call kodak aio support and get a free printhead replaced

I have same problem, Kodak suggest calling customer support for replacement part.

Change it, it's a manufacturing fault involving the lever that fixes the cartridges , even if you fix it now it may come back at any time.

If that error happens every single time you turn on the printer, that pirnthead is faulty.
But if the error only happens some times, try a firmware update from www.kodak.com/go/downloads

In regards to the error message with the printhead missing or come loose......I had that issue just shortly after I installed my printer. I was going crazy trying to fix it taking it out and reinstalling which was a pain, removing the cartridges and then the printhead to no avail. Finally I got smart and disconnected the power cord from the printer itself, not directly from the outlet. Once I did that and turned the printer back on the error was gone. It might have been a fluke, but it worked for me, so you might want to try it.

Well, here is the proper way of fixing or troubleshooting that paper jam error in your printer

Open the printer access door and remove both of the ink cartridge, then remove also the printhead, after that close the printer access door, without those parts. Then it will show a message in the printer screen, "Printhead is missing or has come loose" or "Printhead Not Detected" Install the printhead, just the printhead without the ink cartridges. After that close the printer access door. Then it will show you a message"Ink cartridges is not installed,install ink cartridges". then open again the printer access door, then install the black ink cartridge without the color ink cartridge. then close the printer access door, then message must be " Color ink cartridge is not installed, install color ink cartridge" then install the color ink cartridge." the message must be,"New printhead is detected calibration require, load paper and press start"

Thats the way of overiding the paper jam error message of your kodak all in one printer
hope this will help you guys

by: E.brown

Happy Printing(", )
Kodak AIO tech support 1-800-421-6699