20 Most Recent Kodak ESP 3 Multifunction Printer/ Copier/ Scanner Questions & Answers


Try initiating the scan from the computer, once you plug in the USB cable into your computer, go to My Computer, right click the sanner (should be called something along the lines of KODAK ESP.....) and press scan, then click which program you'll use to scan it, I usually do the Microsoft one, Good luck!!

Kodak ESP 3... | Answered on Dec 10, 2020


Press and hold Cancel and Copy button simultaneously until the On/Off light flashes green. you will see a flashing green on your printer it means its now cleaning the printhead

You can also clean a printhead using computer., first you need to launch the Home center software On your computer and on the uppr right corner of the windows of the software click help icon(?) then go to maintenance and under maintenance you should see the clean printhead. GudlucK!

Kodak ESP 3... | Answered on Dec 09, 2020


i had the printer jam issue when there wasnt a real printer jam.

if you push the print cartidges off to the right, then reach in and push down on the cleaning head that is located on the left on the inside, it pops back down into place and voila, printer jam error message fixed.

Kodak ESP 3... | Answered on Dec 09, 2020


You may face the "Error code-20′ with your printer installed in your Windows 7. The cause of the display of "Error code-20′ may be due to the following reasons. The desired printer may not be the default printer for your prints, issues with the USB composite device, and file missing or file corruption with the printer software supplied by your original equipment manufacturer.

Kodak ESP 3... | Answered on Dec 07, 2020


Efficient, Effective Source for Electronic Manufacturing Services.
https://www.optimatech.net/pcb-ems.aspx

Kodak ESP 3... | Answered on Jun 18, 2019


Hi , i have been using avery templates and label paper at work for ages and always printed off without problems on my lexmark . I bought a Kodak however and all of a sudden I could no longer print off my labels , when I put paper in it just came out blank and said paper wrong size .I could not find any solutions at all and was tearing my hair out . I just kept trying different things and all of a sudden I changed a setting and it worked perfectly.When you go to print your label change the ' scale to paper size ' function to A4 and then it will print.
hope this helps

Kodak ESP 3... | Answered on Mar 06, 2019


You should consult the user manual that you obtained with the printer. I suppose it would contain the best assistance on how to install the printer head. And if you do not have the user manual, you can readily get instructions online. Geeetech Me Creator 3D Printer 2 0 Free Shipping

Kodak ESP 3... | Answered on Apr 06, 2018


error 3501: STATUS_ERROR_UNIT_OPENED_WHEN_IDLE. You probably had it open when you inserted your cartridges.

Error 3502: STATUS_ERROR_MAIN_PAPER_TRAY_EMPTY. You must have inserted some shortly after you turned the printer on for the first time so don't worry.

Error 3609: STATUS_ERROR_UNIT_OPEN_WHILE_PRINTING. This is also another basic function on the printer.

I would recommend not looking at the errors on a printer test page as they show all errors that come up on the printer, even if they are not important.

Kodak ESP 3... | Answered on Mar 28, 2018


There are many situations by witch a printer can act that way. Remove all cartridges after turning off the printer or unplugging it. On each cartridge are metal pins or contacts, usually gold colored. Take a Qtip saturated slightly with rubbing alcohol and rub (clean) off any residue, pat dry and let air dry. Do not touch with you fingers as it leaves film on the contacts. Reach inside the cartridge well and you will see corresponding contacts. Do the same as you did with the cartridges. Visually look at the contacts to see if any old ink may still be present. If so, clean again. Now you have a good connection between the cartridge and the printers contacts. Replace and see if that corrects the problem. Generally, it is a good idea to use brand new carts, but if the previous carts are full, use them anyway. When you turn the printer on, go through the head cleaning and alignment procedure first before you try and print a page. See if this fixes the problem.

Kodak ESP 3... | Answered on Jan 14, 2018


Hello,

Search on internet for service manual, where you can find instruction to disassembling the printer.

Kodak ESP 3... | Answered on Jan 01, 2018


See if you can find an update online for your equipment

Kodak ESP 3... | Answered on Nov 09, 2017


Brand new ? take it back to the store ? ask for a replacement but pick a different brand ,maybe a small $ adjustment might be necessary depending if you pick a more or less expensive brand .

Kodak ESP 3... | Answered on Oct 23, 2017


Could be that your unit is running pretty much at max memory and the slightest thing or interruption will stop it dead in its tracks...Try adding another memory strip or a larger one to see if that has any effect. Or maybe your OS is unstable and the slightest thing causes a malfunction.

Kodak ESP 3... | Answered on Sep 06, 2017

Not finding what you are looking for?
Kodak ESP 3 Multifunction Printer/ Copier/ Scanner Logo

1,478 questions posted

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6220 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

ESP Kodak

  • ESP Kodak

Most Popular Question

share kodak i2400 lan

  • Office Equipment & Supplies
Loading...