WE HAVE ERROR MESSAGE E63. WHAT IS THE PROBLEM?

Search Results

Combination Microwave Wall Oven - Error Code/Message ...

www.kitchenaid.com/...microwave...error-code...f6-error-cod...

KitchenAidQuestion: Combination Microwave Wall Oven - Error Code/Message - F6 Error Code -F6 E8. Answer. Product Symptom: Combination Microwave Wall Oven ...

Over-the-Range Microwave - Error Code - Starts with F ...

www.kitchenaid.com/...microwave-error-code...f...f6...code/P...

KitchenAidKitchenAid's product help articles give answers to your frequently asked questions (FAQs). ... Microwave - Error Code - Starts with F - Starts with F6 - F6E0 Code.

Kitchen Aid Oven Model # KEMS308SSS02 error msg - Lost ...

www.shopyourway.com > Manage My Life > Questions
I have a Kitchen Aid Model # KEMS308SSS02 and I getting the follow error message... is working and was always working but the top microwave/oven does not work. ...Kitchen Aid Oven Model # KEMS308SSS02 error msg - Lost Err/ F6 E0/ ... Most "F6/E0" fault codes is usually because of a loose wire connections, loss of ...

That error indicates a bad keypad. You will have to replace the keypad/control console assembly.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Sensor Error , qualified Tech can help you , could be anything from a fan to a faulty switch

From Samsung's FAQs:

"Some models are equipped with a sensor that can automatically adjust the oven's heating time based on the amount of steam in the oven. If your microwave is displaying E1, E4, or E5, there may be an issue with the gas sensor. For an E1 error, press the Cancel button and check on the food.

"Other microwaves do not give specific error messages and just display "8888" on the LED. If you get this error message, your microwave needs service.

"If the message is either ERROR or E-6, it indicates a mechanical fault.

"For all error indications, including the SE or 5E error, try unplugging the microwave from the outlet for at least ten minutes and then plug it back in. If the error persists, the microwave may require service. Please use our ASC Locator to find your nearest Authorized Service Center."

Or instead let us know if we can help further.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

E63 is a "T1 Max Time error".

It may mean you have a bad PCB assembly, but I would suggest a hard reset.

Unplug it from the wall outlet for a minute, then plug it back in and try again.

Feel free to contact me directly (and please remind me of your full model number from the tag on the unit) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
[email protected]
http://www.microwavedisplay.com
Microwave Oven Control Panel Repair Nationwide

it's so simplel..go to text settigs...then go to message centres...then recorect da centre number....u can have this num frm helpline ....

I own the same Microwave and it just gave me the same error code E-13. I was heating a large plastic coffee mug of cold water using the "beverage" control. The only thing out of the ordinary was I used very cold water from the Fridge. Maybe this had something to do with the Max time error. Hopefully this was a one off error.

E63 ia a "T1 Max Time error".

It may mean you have a bad PCB assembly, but I would suggest a hard reset.

Unplug it from the wall outlet for a minute, then plug it back in and try again.

Please write back with more details if you need further help.

We're happy to help and we appreciate your thoughtful rating of our answer.

E63 is a "T1 Max Time" error. It indicates a problem on the control board.

The first thing to try is a "hard reset". Unplug it from the power line for a few minutes, plug it back in, set the clock, then try again.

Keep a close eye on it, and if it fails again, you want to contact Maytag for free warranty repair.

We're happy to help and we appreciate your thoughtful rating of our answer.

It needs a new key pad it is shorted the ge website has a list of error codes f3 is the keypad