What is code for kosskd 305 dvd player - RCA Universal Remote 3 Device Remote Control

Need a code for magnavox dvd player as well as step by step instruct toons on how to program that code for dvd player

I have found that sometimes the wiring harness comes loose from the main board. The player must be dis-assembled in order to access the main board and display board, you may find the plugs have not been properly seated from manufacture and just need to be inserted to hopefully get your system working.

i have an Auvio 15-305, so this might help. Manual Code Search.
1) Power on the device that you want to control. For VCR and DVD players, you must insert a tape or disc first.

2) Press and hold SET, then press (TV, VCR/DVD, AUD, DVR,SAT/CBL, AUX) at the same time on the remote. The LED will stay lit indicating it is on setup mode. NOTE: DO NOT HOLD DOWN THE KEYS MORE THAN 3 SECONDS OR THE REMOTE ENTERS AUTO SEARCH MODE.

3) Press POWER on the remote. The remote enters a manual code search mode, the LED will start flashing.

4) Press POWER on the remote continuously until the device turns off.

5) When it turns off, turn on the device manually. then try pressing the other buttons on the remote except for the POWER, SET, and DEVICE keys.
If most of the buttons work then press the selected DEVICE key that you selected in Step 2.

i hope this helps.

Are there any scratches on the cd? If there aren't. then you might want to bring in your dvd player to the service that you recieved it from and get it fixed.

I fixed it my self, redownloaded my Windows and repaired it.

No problem about pluging 110v ac if your dvd is auto volt from 100-230volt. when you plug your dvd press power button in your unit or in remote. if dosent any fucntion need a repairman tech.

Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.

Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.

1 yıl önce JVC DR-MV5SAX MODEL , 062C0323 seri no'lu bir cihaz aldım. Kayıt anında 4-5 dakika sonra "RESETTING" diye mesaj veriyor ve cihaz kendisini kapatıyor. Ne yapmam gerekiyor.
Alaettin Zengin 0 312 290 31 97 Ankara

I HAVE KM 305 HOW DO USE UNIVERSAL REMOTE TO PROGRAM IT