Question about RCA 27F534T TV
Using the menu button on the t.v. set an alarm for 1 min in the future. have the t.v change to channel 00 or the input channel @ that time. turn off the t.v and wait until the alarm turns the t.v on.
Posted on Jan 26, 2009
Go in to menu, list and ladel and add the input 1 or 2 to the channel list
so when you flip though the channels its there
Posted on Oct 11, 2008
I used to have an older RCA TV. There was no obvious button or switch to change to the A/V jacks. RCA used a specific channel in the 90's to view VCR's or external inputs through the A/V jacks. I can't remember the specific channel, but I suggest trying every channel from 90 to 99 while you have your DVD player hooked-up and running. Good luck!
Posted on Jul 27, 2010
The original remote had a button labeled INPUT on it that switched the set from TV to INPUT (RCA jacks). Look for a button labeled INPUT on the universal remote. If the universal remote does not have an INPUT button, then I usually find that the button labeled TV/VCR does the same thing. Of course, be sure the universal is set to the proper code for your TV.
Posted on Aug 11, 2007
Push 00 on your remote
Posted on May 02, 2008
Do not have a remote volume does not sound right sounds like coming out a box
Posted on Aug 21, 2010
I have no remote and can't skip to next movie on dvd anyone know how?
Posted on Aug 31, 2016
Channel 91 was my av channel mad random but whatever it works heh
Posted on Jun 26, 2008
I have a similar problem... bought a refurbished 27" RCA TrueFlat, and it didn't come with a remote that has an Input button. I bought a universal remote to cover this. However, I did find a way of changing inputs using only the panel channel buttons:
Change the channel to 02. Then, press Channel - and you will be able to cycle through the inputs.
Posted on May 09, 2008
You can usually purchase an RCA universal remote at a discout mall. Just be sure your new RCA remote has an input button! The older models made in 1993 and 1994 would require you press 00. Not so on the newer ones. Good Luck and thanks for asking!
Posted on Jun 23, 2010
i need change my tv to input or output vidio.
no sound, no picture but tv is on
Posted on Feb 07, 2009
try putting the tv on channel 00, that is where this tv apparently shows the input from at least one on the video channels.
Posted on Mar 01, 2009
I asume your game systems and dvd player are hooked up via the rca inputs.So all you would need to do is purchase a universal remote,program it for your tvand press ch00 which should be the video input.make sure your dvd or game system is on so you know if you are on the right channel
Posted on Feb 27, 2009
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: