20 Most Recent Cyberhome CH-DVD 300 DVD Player Questions & Answers


my chdvd recorder 1500 does not resopnd

Cyberhome CH-DVD... | Answered on May 19, 2020


There are 2 ways to update your blu-ray player. You can go to the manufactures website and download the update to a flash drive. Insert the flash drive into the player and follow the manufactures instructions. You can also update the firmware directly from the menu on the blu-ray player if it`s connected to the internet. Hopes this helps !

Cyberhome CH-DVD... | Answered on Mar 19, 2020


sounds like you have a problem with the laser.laser has to focus a lot sharper to play dvd thus will play vcd but not dvd.Try cleaning first and if this doesnt work would suspect laser faulty,.

Cyberhome CH-DVD... | Answered on Mar 17, 2020


I am sure problem on Laser,may be it does not read any disk.So all times it say insert disk.You can better opportunity replace this damage laser.

Cyberhome CH-DVD... | Answered on Mar 17, 2020


Below is a process to unlock the region's in that DVD player. There were a few methods try this one and post back letting me know how it goes.

1. Remove any disc in the tray.
2. Using the remote, turn the power off.
3. Turn the power on.
3. Open the empty tray.
4. Close the empty tray and wait until the player recognizes there is no disc in the tray.
5. Press "Menu, 1, 9".
6. A large rectangular area will appear in the bottom half of the screen; in the middle of the rectangle will be a single number that identifies the region to which the player is set.
7. Pressing the number keys on the remote will have no effect. Instead, use the up or down arrows above and below the "enter" button to change the region number. ("0" presumably is "region free".)
8. Once you have selected the region code (i.e., the number that now appears in the middle of the rectangle) press "enter".
9. Press the "opne/Close" button and the unit will save the selected code.

Hope this works let me know .Thank you for choosing Fixya! Feel free to leave a positive rating if this solution helps.

Cyberhome CH-DVD... | Answered on Feb 14, 2020


Dear friend,
Pls clean ur dvd palyer lense or replace ur lense

Cyberhome CH-DVD... | Answered on Jan 14, 2020


1. Incomplete disc information or scratched disc. This is the main reason for the issue. Before you try anything to examine or fix your DVD player, it's suggested that you make sure the disc you are trying to play is intact and well. If it's the problem of your disc, then trying to fix your DVD player does not help at all. In this case, you can copy the scratched DVD disc and then you may play it on your player machine.
2. The disc is incorrectly formatted. A common DVD disc or Blu-ray disc is formatted in various ways. You can find different DVD or Blu-ray disc types in the market, such as DVD-RW, DVD-R and 4K Blu-ray disc and so on if the disc is not formatted correctly in accordance with the player, then it will not be detected. You can use some software tools to correctly format your DVD disc.
3. The glitch of the DVD laser lens. Most of the DVD "No disc" problems are caused by the glitch of DVD laser lens. The cleaning DVD laser lens is not easy and requires patience and carefulness. You can start out by trying to blow away the dust if that doesn't work, you can try using a DVD cleaning disc.

Cyberhome CH-DVD... | Answered on Jan 14, 2020


Check out this website for troubleshooting and repair tips on your dvd player. Just paste the web address into your address bar. http://www.drx9000repair.netfirms.com/ They have lots information on these dvd players and also do repairs.

Cyberhome CH-DVD... | Answered on Jan 14, 2020


what are you connecting the sound to the tv with? 

Be aware that a component cable only carries video
http://akamaipix.crutchfield.com/graphics/infolib/homelib/hComponentVideoJack.jpg

cables that carry sound include scart
http://tech.petegraham.co.uk/wp-content/uploads/2007/03/scart.jpg

phono
http://akamaipix.crutchfield.com/graphics/infolib/homelib/hPhonoInputs.jpg

and optical
http://www.getdtvready.com/images/optical%20cable.jpg

If this is correctly connected then check in your DVD player menu for sound output, some DVD players wont auto-detect what type of sound cable you are using and you may have to set it to the type of output you are using.

Good luck.

Cyberhome CH-DVD... | Answered on Jan 14, 2020


insert a normal music cd for 5 seconds eject. put your dvd movie back in

Cyberhome CH-DVD... | Answered on Jan 07, 2020


WMV won't play in the DVD, convert it to MPEG or DIVX.

Cyberhome CH-DVD... | Answered on Oct 30, 2019


my dvd player only plays movies back in black and white...not color. why?

Cyberhome CH-DVD... | Answered on Aug 24, 2019


dvd player keeps saying no disc when I try to play a dvd.what can i do? worked fine until about 3 months ago. started to say no disc when disc inserted but after opening and closing 3 to 6 times it would read.now it just wont read. any ideas?

Cyberhome CH-DVD... | Answered on Jun 04, 2019


Hello
Get into this link, by copy and paste the link into the address bar of your browser. You can download the manual for your remote control from here.
www.ask.com/questions-about/Radio-Shack-3-in-One-Remote-Codes

Cyberhome CH-DVD... | Answered on May 19, 2018


Try using code search to find something that works. All universal remote controls do not contain all possible codes.

Cyberhome CH-DVD... | Answered on Feb 18, 2018


Wat is the code to dvp4000dvd player

Cyberhome CH-DVD... | Answered on Jan 22, 2018


Here is the quick start guide
https://docs.sony.com/release//DVPSR500H_qs_EN_FR_ES.pdf


You seem to be using the Video & Audio connection. Start at the Player. Connect cables to YELLOW Video, RED Right Audio WHITE Left Audio Then go to TV and find the YELLOW input RED input and WHITE input. On some TV's they are separate, some combine them with the COMPONENT inputs (Component is 5 cables you will use 3 of them if you only have COMPONENT inputs)
Some TV's have an input button on the remote but no on screen selection. Try pressing the input repeatedly to access the other inputs. Lastly you will not get upscaling if you are using the 3 cable hook-up. To get upscaling use an HDMI cable to connect. Be sure to not have both types of cables plugged in at the same time HDMI by itself is best. If you reply with the modelof the sanyo TV I'll try to get you more info.

Cyberhome CH-DVD... | Answered on Jan 05, 2018

Not finding what you are looking for?
Cyberhome CH-DVD 300 DVD Player Logo

865 questions posted

Ask a Question

Usually answered in minutes!

Top Cyberhome Televison & Video Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

The Knight
The Knight

Level 3 Expert

76407 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Cyberhome Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Cyberhome Televison & Video

  • Cyberhome Televison & Video

Most Popular Question

push play button dvd player not work

  • Televison & Video
Loading...