How to get owners manual for kenmore stackable washer/dryer 417.42042100?

Yes, but you normally have to remove the case. In the case of a stackable unit, sometimes you can get in from the back panel.

https://www.google.com/search?q=kenmore+stackable+washer%2Fdryer+417.94702300+replace+water+level+sensor

..

http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Washer-dryer-combo-Parts/Model-41794812301/0582/0152000?pathTaken=&prst=0&shdMod=41794812301


http://www.managemylife.com/mmh/owner_manuals/3025/KENMORE-Laundry-Centers-L0512114?brand_name_search=41794812301+KENMORE


The first link is to a parts diagram,the second is to an online owners manual.One or both will have what you need.

Hi,
Either the elements have blown, or it could be a device called a thermal overload which has popped. (There may also be a loose wire which connects to the heating elements). Have your drier checked out by a good handyman or technician.
Best wishes,
Graemevm

The front panel comes off and you will be able to trace the water source. These combo units spin immediatly and if the drain is slow the water will spin up over the edge of the tub during drain.
Eric

stackables are convenient..small but work great.....youll find what you need at lowes or home depot

hi..
When your dryer drum isn’t turning anymore, it’s usually a broken belt. Tearing the dryer apart is usually straight-forward enough but stringing the new belt on the motor and idler pulley can be tricky. The Complete Encyclopedia of Dryer Belt Configurations shows the belt configurations for almost every dryer brand you can think of.

this will fix ur problem..
thank u rate me

Remove the rear cover on the unit and see if the belt is loose. It should not stretch more than 3/4" when you pull on it. There may be an adjusting bolt on the motor to tighten the belt. Disconnect power before working on the unit!! You should have an owners manual for this unit. Check it for further information.

Ray

how do you seperate the stackables for moving

WHATS THE PROBLEM

the washer works off the 220v cord on the back you have other issues with the washer sorry