Re: What is the sequence to get code to find out washer...
Press both the start and pause buttons together and count the beeps. Then the light above the start button will flash so count those. Example is 5 beeps and 9 flashes means error code E 5-9
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The function proceeds in the order of Physical Format to Logical Format.
• If the hard disk is yet to be formatted, the malfunction code "C-D010" will appear. Ignore this code and continue with the formatting procedure.
Use:
• When the hard disk is mounted.
• When the hard disk is to be initialized. (Physical Format to Logical Format)
Adjustment
Procedure
1. Call the Service Mode to the screen.
2. Touch these keys in this order: [State Confirmation] ? [Memory / HDD Adj.] ? [HDD
Format].
(1) Physical Format
1. Touch [Physical Format].
2. Press the Start key to start the formatting sequence.
3. The sequence will be automatically terminated as it is completed.
4. Turn off the Main Power Switch and turn it on again more than 10 seconds after.
(2) Logical Format (Only when initial is set up)
1. Touch [Logical Format].
2. Press the Start key to start the formatting sequence.
3. The sequence will be automatically terminated as it is completed.
4. Turn off the Main Power Switch and turn it on again more than 10 seconds after.
If the washer knob of the unit is going round and round all by itself it means that there is something that has malfunctioned in the unit or else there was an error in setting proper cycles.
You will first need to reset the unit, to see the reset procedure click here
Once you have reseted the unit and even then the washer knob is going round & round it means that a part or parts in the machine have gone bad which may need to be replaced.
The question would be how can one understand which part in the unit has gone bad.
To make things easier, here is what needs to be done to know which part has gone bad.
After reseting the unit, set a new cycle and switch on the machine.
If the washer knob starts going round and round, the mode+Door lock light will flicker in a sequence, for example, it may flicker 4 times before taking a pause and then flicker 4 times again and continue this sequence.
Once you know what is the count which is also the fault code there is a fault code chart which you can refer to understand which part has gone bad.
The fault code chart is as follows:
Hope this helps, do let me know if this information was helpful or else you need more clarification on the same.
For Duet washers, including the WFW94HE, you need to make sure that the washer is plugged in and turned on. Make sure that it is in standby mode (not running a program). (If you just turned on the machine, wait at least 30 seconds before continuing.)
Next pick any three buttons on the control panel, excluding the power button; you will need to keep track of the order that you choose. Then press and release each button and repeat the sequence twice more in 8 seconds. (The sequence becomes: press and release button 1, button 2, button 3, button 1, button 2, button 3, button 1, button 2, button 3 quickly.) If it works, you will see all of the control LEDs light up and 888 on the time remaining LCD screen. Note: the washer will exit the diagnostic more if no buttons are pressed in 5 minutes. You will use these three buttons to work through the diagnostic tests so make sure that you remember which one is which.
If this sequence doesn't work, turn the washer off and then back on. Try again with different buttons. (It's possible that one button is malfunctioning.)
1. Run "Hard Disk Format" selected in the following sequence: Tech. Rep.
Mode Function Image Memory.
2. If the same malfunction persists, change Hard Disk Drive.
3. If the malfunction is detected a third time, change Memory Board.
You might find a sequence online for resetting the machine. This is a coded sequence of pressing buttons on front of machine. I managed to get my sort of going again by using this method. worth a try if your bored!
If the START / PAUSE button lights up red, the washing machine detects a malfunction. Now you should count how many times the START / PAUSE button lights up red and tell to us what kind of malfunction is being done.
Try to rapid reading of alarm codes when the appliance is in normal operating mode (e.g. during the execution of the washing
programme):
Press and hold down START/PAUSE and the nearest option button for at least two seconds: the LEDs initially switch off, and then display the flashing sequence indicating the last alarm.
LED indicator START / PAUSE with red light = indicates the first digit of the alarm code (family)
• LED indicator START / PAUSE with green light = indicates the second digit of the alarm code (internal number of the family)
Frigidaire has a website that contains the "function codes" for all of their appliances. Go online and using the model number of your machine, see what SUPPORT they offer for your product/model#. It may be halting because of a timer malfunction or "solenoid" malfunction which would be a problem determined by a qualified repair agent.
Frigidaire is a good company with customer service questions. Number is:1 (800) 374-4432Monday - Friday 9:00 am - 5:30 pm (EST)
Try pressing the following key pad buttons within 5 seconds - PREWASH OPTIONS - WASH TIME, PREWASH OPTIONS - WASH TIME, in this sequence and allow the washer to run. The LED display will start counting down as the washer begins a sequence of short diagnostics tests. If no error is present, the washer will return to standby. If the error persists, you may have a blockage in your drain pump. Please run the test and let me know the results. Total test time is about 1 minute 40 seconds. I hope this helps you.
First of all you
may want to reset the unit, let me know if you need the procedure and after
reseting the unit the washer knob may go round and round all by itself, if
this happens the door mode light will flicker in a particular sequence which
once once counted we can understand exactly which part in the machine has
malfunctioned which once replaced the unit should start to work properly.
×