Ice dispenser on kenmore elite 31" won't dispense

Question edited for clarity.

Check out the video and fixes.

https://www.google.com/search?q=Kenmore+Elite+model+596.+My+water+dispenser+is+leaking

..

https://www.hunker.com/12322271/how-to-clean-the-ice-water-dispenser-on-a-kenmore-refrigerator


https://homesteady.com/how-12027918-remove-clean-kenmore-elite-refrigerator-water-dispenser.html

the pump on the back of refr might be shot.if there is no water in the ice tray look on the back make sure that your supply line works. If it does the pump is bad.

It is possible the water control valve for that dispenser has failed and will not open. This happens a lot for those and the ice maker valves. All you need is the model number for your refrigerator and that will look like this for Kenmore. 213.564897 for example. and I will help you find the correct part number. Sea Breeze

check for a child lockout button it will look like a tiny padlock ,press and hold for 3 sec.(could be the freezer door light switch)

There is a small door under neath ice maker shelf (literally) w/ 2 small screws that keep it in place,or a button that can release ice maker on the rt. side of machine. Good luck!!

take ice bucket out, dump ice, clean with hot water and let dry ,,,, put ice back in and try it ,,, bucket is most likely frozen up thru ports

I resolved the problem on my Kenmore Elite model 106.55616400 by removing the drip tray, taking out two screws that hold the panel, and disconnecting and reconnecting the wires from the panel to the board. Unplugging the refrigerator did not work.

When you push the ice dispensing lever, you should be able to hear the micro-switch clicking. If no click, the switch is faulty. The auger motor which is activated by the lever could also be faulty. This is the motor that causes the auger in the ice bucket to rotate one way for crushed ice and the other way for cubes. The auger could also be jammed. Try switching between crushed and cubes to unjam the auger. Empty the ice bucket and start again.

Should be no longer than 24hrs. Is the freezer good and cold.. has to reach a certain temp before icemaker activates. Might take little longer if you put a lot of warm things in freezer or refrig. when you made the change. Is there any water or ice in the icemaker itself? Water may not be getting to icemaker call them back out if it dont work soon thats what warrantys for :0)