Hi there, I recently did a firmware update for my Sharp LC-46D64U. I did this to see if there were improvements in the digital TV signal strength as I had heard that Sharp attended to some of those issues. After the update, my VCR and Cable inputs work fine and bring in video and audio. However, my separate Phillips DVD and Sony Blu-Ray players no longer give a video signal. I can hear audio from the component audio hookup from the DVD (video is also component) and the Blu-Ray is HDMI, but no video signal from there. Clicking on View Mode on the remote, I get the message "No View Mode Screen is Available". Inputs have been checked, connections are fine as they should be. TV plays TV channels, VCR and Cable inputs just fine. Can't get 'digital' disc signals though.
SOURCE: Sharp Aquos 37" Audio Static Issue when watching DVDs
i have had to replace the hdmi input board on these units to fix them.
SOURCE: Sharp LC46BD80U LCD TV was
It is not your TV part of your set it is your the DVD console. U will have to let a tech clean it for you. Do not try this yourself you will damage it.
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.
101 views
Usually answered in minutes!
×