Can not turn the machine on -need electronic card

Contact vendors on Amazon.com or other sites:

Example:

https://www.fandfwholesale.com/powermatic-ii-electric-cigarette-injector-machine.html

Quoting from link above:
"Powermatic II Cigarette Injector is an electric, spoon fed injector and the first product of its kind we've carried in quite a while. We have been very impressed with the function and ease this product offers. The spoon fed style of this injector eliminates many of the issues that other auger driven injectors have. This machine will make both king size and 100 mm tubes and features electronic jam protection to ensure that that the machine does not break from overfilling the chamber. The compact and lightweight design of this machine allows for easy use and storage. The large tobacco fed hopper and removable tobacco tray, will be sure to have you rolling cigarettes in three easy steps. 1. Plug in and turn on the power. 2. Lift the lever and fill the tobacco evenly. 3. Press the lever fully down to start filling your tubes. The product includes accessories to clean your machine and comes with a 1 year manufacturers warranty. Please fill out warranty card and mail in upon receiving machine. Machines cannot be sent back to Smokers Outlet Online, Inc. for refund or credit. -------------------------------------------------------------------------------- For Warranty service, all machines must be sent to: Powermatic Service Center 17005 Evergreen Place Suite B City of Industry, CA 91745 1-626-964-5678 zico.com@verizon.net"

Work with the previous owner and find out where it was sent and any records of it being sent. If monies were paid have the credit card owner contact the credit card coompany and contest the purchase. If you want a new mother board you would need to post the make and model of the machine.

You are not too bright are you David... Never give your banking information to anyone online...

What kind of water? If it is sea water it is probably gone as sea water is highly corrosive. Did you immediately remove the battery and leave it out? If not, then the water, which conducts electricity, could have sent over 300 volts from the flash circuit into the rest of the camera and fried a number of circuits. Without seeing the camera it is impossible for me to give any other suggestions

do you check your power wire? please sent your machin name and model

TRY CODE FROM online sites...

Your refrigerator has stopped defrosting. Depending on model it could be Defrost Timer or Electronic Defrost Control, Defrost Heater and Defrost Thermostat. You can salvage the food by manualy defrosting and that will give you a few days to collect the parts and get her going again. Place your frozen foods in a cooler and use a hair dryer to help melt the ice behide the rear of the freezer back panel, Hope this helps and wish I had your model number I could have sent photos and part numbers, Thanks, Sea Breeze

That has to be nothing more than a defrost problem. Inside the fresh food compartment and behind the controls there is a an electronic defrost control board. I will give you a link to find your parts photo and discription of its location better. The part number is Click Here=> W10135900. Because your model needs this board it is the most likely reason that defrost is not taking place. There are two other possibilities and that is defrost heater and defrost thermostat. The first place I sent you to does not have a photo but I will give you a link soon that you can look at the parts. You need to manually defrost until the board or defrost heater is replaced. The part number of your defrost heater is Click Here=> 2188174 and the parts manual does not show a defrost thermostat Click here=> ED2FHEXSS02 and page 16
Here is your user manual here=> ED2FHEXSS02 If you should need me you may find me here at Fixya or here=> Appliance 911. If you still need assistance, contact me here at Fixya or through my site HERE or here Sea Breeze Appliance Parts feel free to ask any time, Sea Breeze

SC866 B SD Card Error 1: Confirmation
The machine detects an electronic license
error in the application on the SD card
inserted in the controller slot when the
machine is powered on.
The program stored on the SD card contains
electronic confirmation license data. If the
program does not contain this license data,
or if the result of the check reveals the
license data in the program on the SD card is
incorrect, then the checked program cannot
execute and this SC code is displayed.
• Required program missing or
incorrect
• Download the correct
program for this machine
onto the SD card.
SC867 B SD Card Error 2: SD Card Removal
The SD

1-800-701-leap 5 bucks shipped