Franke Coffee Makers & Espresso Machines - Recent Questions, Troubleshooting & Support

you can change the battery yourself. it's located on the left side on the upper print. if you change it be sure the machine is in the 'on'-position, if not you will lose all the programming-data. the battery is an 'cr-2032' lithium battery. it is very easy to do :-)

Check other parts suppliers. It can only be an O-Ring or a compression fitting. https://www.google.com/search?q=frankie+little+butler+fh-160+parts+diagram ..

Likely cause of this is a blocked worm drive. The worm drive takes the coffee in and then, after brewing, ejects the used grounds into the Dump box. Over time, coffee grounds accumulate on the worm drive and eventually jam it. This is Malfunction 8. Machine will need to be stripped and cleaned. Hope this helps.

Question edited for clarity 'to colt' to 'too cold'. Some people like the cold brew stuff. :>D

Hi, if you're adding in the milk prior to the cofee being made, then please add it towards the end. If adding and the beginning, then vice versa. It sounds like the milk is exceedingly colder than any water that you're loading into the machine. You might try using powdered milk so that the milk that you use will be at room temperature. Thank you.

Hi, Please restart your machine. Check pump pressure, boiler valve and the water supply. You can check the manual for more details. I believe it should be on page 9 and/or the table of errors. Thank you.

We got our parts from Franke top engineers at www.coffeeoffice.ie Competitive prices and very friendly service.

Question moved from Washing Machine category. Test the switch with a multimeter for power both sides. If the switch is working, you have done everything that a consumer can do. You will have to take it in for service. It may need a new control board.

You will need a Franke Install card unfortunately. You can get them on Ebay.

For thus franke don't have answer which is the common problem in franke machines

I had a Franke Flair machine in an airport business class lounge. We had a steam wand blocked for safety reasons. Check out the video in the link. https://www.google.com/search?q=Franke+flair+unblock ..

I had a Franke Flair machine in an airport business class lounge. We had a steam wand blocked for safety reasons. Check out the video. https://www.google.com/search?q=Franke+flair+unblock ..

I have dealt extensively with Franke machines in a commercial setting and any mechanical issues are best sorted out by a Franke technician. They have very complex electronics. https://www.google.com/search?q=Franke+A200%2C+ceramic+valve+1+position+error The valve is around $80 so it is better to have a proper diagnosis done.

FRANKE CONTROL VALVE Ceramic A200 Coffee Maker ...

https://picclick.co.uk > Franke-Control-Valve-Ceramic-... FRANKE CONTROL VALVE Ceramic A200 Coffee Maker 1A335126 - £80.00. FOR SALE! MPN: 1A335126. See our About m e Page. 224011362016. ..

its a brewer fault or brew motor.

I am a Franke technician. After and possibly during the descale, because probably you haven'nt done it in a long time, steam was able to escape through the fittings as the limescale damaged the silicone rings beforehand. The steam damaged the klixxons or the thermoblock itself. You will need one of us unfortunately....

I would contact your supplier or the manufacturer for advice. You don't want someone who is not an authorised repair agent because they may not be able to get specific spare parts.

best bin it before it electrocutes someone

https://www.inknetworks.co.uk/how-to-factory-reset-windows-10/ https://www.youtube.com/watch?v=Zonjyd2L_GQ

https://www.youtube.com/watch?v=RcsT1SdxbdE

https://cotecco.com.au/