Scanned picture quality

Hello
Actually you do have to select a program for working with photographs such as Photoshop, or Adobe Elements, maybe Microsoft Paint or Picasa maybe. Then your scanner will scan and the pictures will be saved and they'll be opened in the photo program you have chosen afterwards.

You can change colour option is scanner software from where you scanned. For that before scanning open that software then go to it's settings and change scan option to color if you want color. Let me know if you need further assistance. Thanks for using FixYa.

The reason it has white lines is because the glass is dirty in the inside. If it has one speck of anything inside the scanner it turns into a line because it stays in that one place as the picture slides over it. So that line is actually a dot that is covering the picture throughout the scan. The solutions don't work. I don't suggest taking yours apart. I took mine apart and cleaned the glass. The pictures scanned fine and then the lines show up again. The real solution is to get your money back if you can. It will do this over and over. It's a design flaw in the scanner. The picture is actually squeezed as it it scanned. As pictures are squeezed against the glass... residue builds no matter how clean your pictures are.

Hi
Supports user-specified installation
Removes unwanted blue cast from scanned color images.Update your Driver , Click the below link for your scanner Model
http://driveragent.com/archive/10242/64-1-531?q=microtek+3880+scanner+displays+blue+shade

Hardware failure, nothing much can be done, just replace the scanner.

Apparently you might need to because scanners are most times not reserviceablw when problems of faded output and discolouration is evident.

Properly clean the surface of the scanner and leave your scanning image application to default settings

Hp scanner 2300c
while scanning a blue or red line appears on scanned imajes

driver

Whats the main problem? I see your problem is the scanned picture? Actual you will configure it to go to the my picture folder because every scanner has its default were the scanned images go. Try to go to the preference/configuration of the scanner then you can choose from there.

i have a microtek scanmaker 3630. i lost the installer, but i have downloaded an installer but it is not a high quality on its scanned pictures. can somebody give me a site where i can get or download the right kind of software for my scanner