Adding videos to Sanyon NVM-4070

Yes, there is update, but for now , its just through the Sanyo official site, with little charges, and its more save and dependale, virus free.

Sincerely, i will say to upgade for now you have to visit SANYO web page to upgrade, with little charges.

To upgrade vivisit Sanyo site, the NVM-4070 upgrade will cost some charges

Try to hold pressing the reset button for 15 second. Try it.

look

MioPocket 2.0 R44 and higher will full fill your need. If you need to boot from SD card (support up to 32GB SDHC), then you need this file http://www.gpspassion.com/upload2/Sanyo_NVM-4370_Autorun_files.zip

This unit only supports MPEG4/H.264 file. The files format has to be .MP4. This unit cannot play all MPEG4/H.264 movie files. Most movies out there are converted using DivX or XviD codec so if you need to convert them to this supported format. It will mostly cost you time if you found a free converter.

If you don't have time. You might try my basic hack to add a 3rd party media player that will play almost everything out there and it also supports sub-titles. You can check out my video on YT @ http://www.youtube.com/KhaKev.

Here we go
http://sanyoservice.com/pdf/images/NVM-4070_Manual_EN.pdf

Try this..
Nav
Address
Menu
Nav

note that you have to tap the screen with suffient pressure and even though you hear a beep it may not have accepted it
If it still don't work you may try reloading the software or maybe you have a defect

Jack tell me more about your Prob. I might have a solution.