20 Most Recent Sanyo EasyStreet NVM4070 GPS Receiver Questions & Answers


1.Visit the Sanyo corporate website and navigate to the webpage for the Sanyo Easy Street GPS device :click HERE .This will bring you to the purchase page

2.Click on the link "Add to Cart" and begin the purchase process.Locate the serial number on your device. Accomplish this by looking at the sticker with a ten-digit number printed on it, affixed to the back of the antenna. Input the serial number in the field provided on the screen and click "Continue." Follow the instructions on the screen to complete your purchase.
3.For how to activate traffic service visit : ...www.navigation.com/is-bin/..

Sanyo EasyStreet... | Answered on Oct 31, 2011


Push the reset button for more than 15 second and try.
Mine had the same problem I solved it this way.

Sanyo EasyStreet... | Answered on Aug 20, 2011


I have the same unit and it will not charge unless it is turned on.

Sanyo EasyStreet... | Answered on Jun 26, 2011


According to Sanyo support your are supose to plug the unit to the pc do a format of the drive (the unit or gps) and download the software included in your cd, that should fix it. If not they tell me to have the unit send to them. Mine did not work so i have to send it back good lock with yours!

Sanyo EasyStreet... | Answered on Oct 27, 2010


If you delete all the information and dont make some back-up, its so hard that you can recovery this data. I suggest visit your delaer site and updated this maps from there.

Some programs recovery delete files, but alot times, this files are recovery with wrongs.

Sanyo EasyStreet... | Answered on Sep 08, 2010


Try to hold pressing the reset button for 15 second. Try it.

Sanyo EasyStreet... | Answered on Aug 09, 2010


1. try change the navigation settings.
2. if not selltled, reset to factory setting,
3. or press the reset pin, rigth beside the ON and OFF button.
its seltle.

Sanyo EasyStreet... | Answered on Aug 09, 2010


Yes, there is update, but for now , its just through the Sanyo official site, with little charges, and its more save and dependale, virus free.

Sanyo EasyStreet... | Answered on Aug 09, 2010


To upgrade vivisit Sanyo site, the NVM-4070 upgrade will cost some charges

Sanyo EasyStreet... | Answered on Aug 09, 2010


Sincerely, i will say to upgade for now you have to visit SANYO web page to upgrade, with little charges.

Sanyo EasyStreet... | Answered on Aug 09, 2010


Well it depend on the window you are using to run the sorftwere, you may need window XP, VSTA. to run it., and if you are installing the map through the sorftwere, you must be sure the computer you are using to run it conect to internet through when you finished, if not, some of the navigation function will fail to operate.
dijicom.

Sanyo EasyStreet... | Answered on Aug 09, 2010


Sorry I did not understand the questio. Do you want to update the firmware or download the maps or is it something else?

Sai.

Sanyo EasyStreet... | Answered on Jan 13, 2010


I have on occasion been able to get my NVM 4070 to connect with my phone. I have tested several different phones with this GPS. I noticed that if you are using a smartphone or pda it has trouble connecting. However, if you try and connect a basic phone, like a Motorola Razr, it has no problem.Overall it is a frustrating process that involves quite a bit of superstitious behavior, on my part, to get the devices to connect. Try restarting both of them.

Once you actually get them to connect, good luck. Like I said, I am able to connect mine, but usually once I leave my car, I have to start the pairing process all over again.

Sanyo EasyStreet... | Answered on Aug 13, 2009


Make sure the FM transmitter isn't on ..if it is you'll need to shut it off or tune your radio to whatever freak it's set to

Sanyo EasyStreet... | Answered on Jul 08, 2009


I was told By Sanyo that map updates would be available thur the Sanyo site later this summer and to keep ckecking..

Sanyo EasyStreet... | Answered on Jun 19, 2009


The file has to be an MP4

Sanyo EasyStreet... | Answered on Jun 17, 2009


Try turning it OFF using the ON OFF switch on the bottom.. if that doesen't work try the reset button right next to the ON OFF switch on the bottom..you'll have to use a toothpick or something

Sanyo EasyStreet... | Answered on Jun 17, 2009


Try this..
Nav
Address
Menu
Nav

note that you have to tap the screen with suffient pressure and even though you hear a beep it may not have accepted it
If it still don't work you may try reloading the software or maybe you have a defect

Sanyo EasyStreet... | Answered on Jun 17, 2009

Not finding what you are looking for?
Sanyo EasyStreet NVM4070 GPS Receiver Logo

Popular Tags

29 questions posted

Ask a Question

Usually answered in minutes!

Top Sanyo GPS Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

The Knight
The Knight

Level 3 Expert

76455 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34979 Answers

Are you a Sanyo GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sanyo GPS

  • Sanyo GPS

Most Popular Question

easystreet nvm4070 gps receiver i need t

  • GPS
Loading...