How to connect the scanner into the computer

Install the software (Brother MFLPro0 relevant to the printer. If you do not have the original CD download the appropriate suite from Brother Solution Center.
When you install the software you will be asked to choose USB, or Local Network. You can always install the USB and connect the printer to the calculator through USB. Different installations for different connection types (USB, LAN)
After you configure the software, you can open the Control Center 3 software and use the fax.
To be able to fax, you need to connect a telephone cable to the port marked line. After you do try pressing the unhook button. If connection to the phone line is correct you will hear the tone.
The MFC can fax without being connect to a computer, just the phone line.

Unfortunatly the full driver and software have not been created for Windows 7 for this particular Machine( mfc-210c)

You can install as printer and basic scanner by simply plugging in the USB cable, windows 7 will install the drivers automatically.

on the scanner plate first scan document and select fax

Go to www.brother.com
Under Printers Soultions select printers.
In the search bar type your model number.
Here you can select Support and type of operating System. Click on view Brother solutions Center for MFC-210C, Click on downloads, click on drivers etc.. you will find the drivers for your peticular Operating system. Download full utilites and drivers.

Thanks

in print settings on your document, instead if print all, just choose page 1 of 1 or 1 of 2 or whatever you are using

my mfc 210c printer power supply are blast please where to buy power supply circuit

First disconnect the fax from the phone line. take regualar phone and plug into the wall outlet. dial thefax number. and listen for the the fax tone.
if the line is good. connected the fax and do the follwoing:
Manual Fax mode:
Press the fax icon (should turn green)
Load the document on the scanner glass.
Dial the fax number
press Mono Start.

if not, try to find a good phone line to use.

i cant find the softwares of mfc-215c.i can only print but cant use scanner n other fitures in it

Most likely they are being held in memory so you need to go into the menu to have them print out.

Manual:
http://www.retrevo.com/search/v2/jsp/downloadPage.jsp?doc=eadfbf331ebd7bb9aab2bde2a604a084&q=Brother+MFC-210C

You have to connect the mfc directly to a USB port of your computer. DO NOT use a hub.

The mfc uses the XP buil-in scan driver.

Did you install the whole mfl-pro suite? Use paperport to do scanning from your pc.