Posted on Apr 29, 2009

Replaced lamp, still having picture problems.

We have a Samsung HLP4663W and started having trouble, picture went out and timer, lamp, and standby lights coming on. Lights may all 3 be on or only 1 at a time. Changed bulb, TV came on and seemed to work, but lamp light still showing. Then after a few minutes I noticed the color and picture quality really bad on right side of screen.Turned TV off and back on a few minutes later. Seemed ok, other than it took a while for the screen to be bright. Later that evening, turned TV on and after about 2 min the screen went black and the timer light started flashing. The only way to turn off was to unplug. Still taking awhile for brightness. Any ideas?

1 Answer

Anonymous

Contributor 3 Answers
Posted on Apr 29, 2009

Anonymous

Contributor

Joined: Apr 29, 2009

Answers

Questions

Helped

2010

Points

Take it to an authorized samsung service center, your color wheel may be broken or your dmd maybe damage.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Resetting lamp timer for samsung HLP4663W

If you do not have owner manual Google the model number with "manual" to get it.

You can also Google the model for "lamp timer reset", These sets I have worked on but never needed to reset the timer.

Read full answer

Apr 01, 2012 • Samsung HLP4663W 46" Rear Projection HDTV

0helpful

4answers

TV starts then shuts off

May i know the model and the make of the product in details so that it can help me resolving the issue is a more prompt manner

Read full answer

May 08, 2008 • Samsung HLP4663W 46" Rear Projection HDTV

0helpful

1answer

I have a HLP4663W Samsung DLP. The set will not turn on and I have no picture. I used to turn the set off, let it rest for 10 minutes or so, then turn it back on and it worked. This method doesn't...

If you have never replaced the LAMP and Have More then 5,000 playing hours Lamp is bad.
Samsung Parts 1-800-627-4368
Mats has Lamps for $89.00 1-800-628-1118

Read full answer

Aug 02, 2011 • Samsung HLP4663W 46" Rear Projection HDTV

0helpful

1answer

Sound but no picture

if the remove the lamp and you have seen it is busted try replacing it with a new if it is not check the ballast.

Read full answer

Aug 11, 2009 • Samsung HLP4663W 46" Rear Projection HDTV

0helpful

1answer

I lose picture and it's replaced by black screen w/ colored block

heat is usually the prob. sometimes when it overheats it will warp the whole cabinet inside.

Read full answer

Jul 01, 2009 • Samsung HLP4663W 46" Rear Projection HDTV

3helpful

1answer

No picture on a Samsung HL-P4663W, trouble lights confusing...

The most common blink code for the Standby/Temp LED is the Temp Sensor and or Actuator Board. You can confirm which on by jumping the CN106 connector on the Actuator board. If the set works now, the Temp Sensor must be replaced. If it doesn't work, the Actuator Board would need to be replaced. If you are not familiar with the chassis or electronics at all , I do not recommend trying to fix it, call a professional. Don't take the chance of damaging it further.
I hope this helps,
Skyassoc

Read full answer

Jun 29, 2009 • Samsung HLP4663W 46" Rear Projection HDTV

0helpful

1answer

Picture blinks out and in

If you haven't replaced the lamp recently, its the likely cause. If the lamp is known to be good, its possible that the ballast board (lamp driver/power supply) is defective. And, in some cases, the lamp door interlock switch may be the culprit. So make sure that the lamp door is properly aligned so the switch engages properly.

michtech

Read full answer

Feb 15, 2009 • Samsung HLP4663W 46" Rear Projection HDTV

0helpful

1answer

No picture

Please check the manual for error index(lamp blink).
It seems related thermostat or power board.

Read full answer

Jan 31, 2009 • Samsung HLP4663W 46" Rear Projection HDTV

0helpful

1answer

Samsung DLP HLP4663w. 6 months ago, the colors started messing up and it made this screaming banshee sound. The TV would turn itself off after a minute or so. I read about it and figured it was the color...

I had a expirence like yours.
You better to exchage the power board.

Read full answer

Jan 13, 2009 • Samsung HLP4663W 46" Rear Projection HDTV

1helpful

3answers

Samsung 46" DLP

Did you order an ORIGINAL REPLACEMENT LAMP? There's lots of guys out there claiming to sell original lamps but there really not the original. For Samsung TVs (The majority of them) use Philips branded lamps. Check and make sure you lamp is a Philips lamp. Check out FixYourDLP blog for more information as there's lots o interesting reading there

Read full answer

Jun 20, 2007 • Samsung DLP HL-P4663W 46" Rear Projection...

Not finding what you are looking for?

View Most Popular

HLR5067WX 50" Rear Projection HDTV

Televison & Video

Resetting lamp timer for samsung HLP4663W

Samsung HLP4663W 46" Rear Projection HDTV

270 views

Ask a Question

Usually answered in minutes!

Check Out the Latest HD Televisions Report

View all Fixya Reports

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual

. HLR5067WX 50" Rear Projection HDTV...

HLR5067WX 50" Rear...

Have a manual for Samsung HLR5067WX 50" Rear Projection HDTV? Or just drag it here!

Related Topics:

Replaced lamp, still having picture problems.