I set the i-pod to the maximum volume and it is not loud enough. At that voulume I can still hear background noise. Is there a way to override the maximum volume or is there some type of limiter to the sound? Other things such as my portable radio reach a much higher volume using the same earphones.
Re: The volume is not loud enough on my i-pod classic
There is a volume limiter under "settings", check to be sure its turned all the way up (you actually have to click the center button to save). Also you will find "Sound Check" being turned on greatly reduces volume.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Did you put your own ring tone on there? If so...it is not loud enough. I know this from previous experience. When you record one and drag into the mini sd card you have to do it very loud. You can use the recorder that comes with that phone and record one and then select it as the tone but make sure you get it close to the mike.
I have had that laptop once and had the same problem. I knew that it was the maximum volume of the speaker so I purchased external USB speakers to connect to the computer and the sound was clear and loud enough to hear anything played on the computer.
this should help you below. If you have set a password on the volume limit and forgot the password please let me know cause you will then have to remove the password or restore the device.
This is only one step in trying to remove the volume limit it may work or it may not and you will have to use another method. But please tell me if this method works and if it doesnt i will instruct you on where to go from here.
To set the maximum volume limit for iPod classic:
1 Choose Settings > Volume Limit.
The volume control shows the current volume.
2 Use the Click Wheel to select the maximum volume limit.
You can press Play to hear the currently selected song play while you select the
maximum volume limit.
3 Press Play/Pause to set the maximum volume limit.
A triangle on the volume bar indicates the maximum volume limit.
4 Press the Menu button to accept the maximum volume limit without requiring a
combination to change it. Or, on the Enter Combination screen, set a combination to
require that the combination be entered to change the maximum volume limit.
If you need further assistance please feel free to follow up with a comment and i will be here to
assist you. If this assisted you please feel free to rate the comment. thanks and have a great day.
Check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Pull up older posts. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. http://electronicshelponline.blogspot.com/