My emachine computer doesn't start up

Try to boot it from safety mode.
and try to restore your system first.
If the restoring is failed, boot safety mode again and back up your files.
If you can't boot your laptop from safety mode, use anti virus program CD like norton.
Mostly, your system is messed up by adwares, spywares, and virus.
If all things fail, you should check your HD.

If you need further help, reach me via phone at https://www.6ya.com/expert/hee_458d01a29d21e0d3

Hello,

Was it working fine before? If it does, then you would need to update the driver for your DVD.. Or you might have an outdated DVD driver. You can use RadarSync to update it.

David

First - re-seat the hard disk and reboot the computer. If the computer does not boot up then reboot and go into the BIOS configuration to see if the BIOS detects the hard drive. If it doesn't detect the hard drive then it could be faulty.
Then the hard drive needs to be replaced in the computer/laptop, Windows installed and the computer or laptop's device drivers plus your programs etc. to get a functioning computer/laptop again.

Is java hogging up the cpu ?

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_70466cb634a57543

Sounds like you might have corrupt window system files or the machine might not be recognizing the hard drive.
Press the DEL button to go into the BIOS. Go to the section that shows you the hard drive. If it doesn't show you a hard drive model and shows none then your hard drive is bad and would need to be replaced. If your hard drive is recognized in the BIOS then you'll need to try and reinstall windows. If you can't get windows reinstalled then the hard drive is bad at that point as well.

Hi josephamy99
Yes , you can . Launch the install disc and follow instructions .
Note : back up all your data and drivers ( very important , the drivers , some hadware could not function if you don't reinstall the drivers on your new system ) .
Best regards ,
fanaudi .

Press CTRL + ALT + DEL - the Task Manager should appear. If it does then click File, New Task (Run) and type explorer then hit enter, it should return to normal.
If the Task Manager doesn't appears or Explorer doesn't starts then the system is severely corrupted, you will have to reinstall Windows using the recovery cd.

hello step:1 enter to this web site www.ma-config.com step 2 : make like in this video http://www.youtube.com/watch?v=9ySs9HIvNkI or http://www.youtube.com/watch?v=rf31_dG0_9k

looks like it's stuck in a startup loop, can you boot from a windows cd into repair console (press R to repair with xp, choose repair my computer with vista or 7) ?

if so, type the command fixboot and after that fixmbr, if it still doen't work, try the chkdsk /F /R
command. if that doesn't work, try booting in hirens boot cd (download v13 and burn it to a cd rom) if still no success, you need to reinstall windows, if that doesn't work, replace the harddisk and reinstall.

Dear Consumer,
We regret and apologize for the inconvenience caused to you.
We would request you to kindly share your contact details or contact the Philips Consumer Care on below mentioned details.
Thanks & Regards,
Philips Consumer Care, India [email protected] 1800-102-2929 1860-180-1111