Samsung scx-3200 ready light shows red - SCX Samsung Office Equipment & Supplies

Fix firmware reset SCX-3200 SCX-3205 SCX-3205W SCX-3207 ' eReset - fix firmware reset printer 100% toner

Mira los v?deos en el siguiente enlace. Resolver? tu problema.

Could be the internal battery gone. Does the date still display as current?

Check that there is a chip (circuit board) on on end and that it is not loose. Look for signs of damage or a deep scratch which may have comprised it. If the cartridge was remanufactured, the chip may be faulty or incorrectly placed. If it is a new original cartridge, you may have a faulty chip.

Check this site:
http://www.manualslib.com/manual/201798/Samsung-Scx-3200.html?page=31

Samsung SCX 3200 User Manual Page 31

Ok here you go, Ahmet. This link will take you to the Samsung Website, directly to the page for the SCX 3200 printers. There you will find the basic drivers for Windows as well as the multi-functional support software. Hope this helps. In the future, it wiill probably be faster for you to search on Google or Bing for things like this but it's been my pleasure to help just the same!

http://www.samsung.com/sg/support/model/SCX-3200/XSS-downloads

HI PLEASE CLEAN THE CCDUNIT .YOUR PRINTER CCD UNIT IS VERY LOTS OF DEST.AFTER CLEANING CCD THEY PRINT SAMSE SO REPLACE CCD UNIT WITH CABLE

If you refiil the toner cartridge ,now must be change the cartridge chip.The chip countered the total copy,not how many time you refill the toner.The original chip working 1500 copies,change one new chip to 1,5K or 3 k or moreK(K=1000 copies).

hi my printer is samsung 4300 and problem is tonne resat?

i think your paper sensor is damaged, replace it

red light show : when paper is not present or toner is not accepted, or door open


We have Zero cost solution for samsung -scx-4300, scx-4824/4828
ml-2240,ML 2245, ml 1640. clp 310/ 315, It is working permenently.
Refill cartridge is working for ever. which is running successfully.
also provide other new model reset solutions.

www.nakshatraworld.com

mob: 9713862555, 9893282285
[email protected]

I have the same problem with my Canon ImageRunner 3200