I am trying to install my FVS318G - NetGear FVS318 ProSafe VPN Firewall - Router - EN, Fast EN

Has the subscription run out on the AVG product? An update will not install on an outdated subscription.

Do you have more than one anti-virus program installed? having more than one anti-virus program installed can cause problems as the two programs (or more) may be fighting each other.

Finally, try uninstalling the AVG product and reinstalling it again. Then try the update.

I had the same problem; the unit was working and then just stopped working. The software wouldn't let me uninstall so I could reinstall. The good news is I finally fixed this problem. It was one of those instances where you try everything possible and you don't know which fix actually worked. For what it's worth, here are the steps I used.

I used the Windows System Restore.....to reset my computer to an earlier time.

I then tried to reinstall Tri-capture with the Tri-capture audio interface plugged into the computers USB port. After the error message saying Tri-capture is connected, "please disconnect the device"... I unplugged the USB cable from the Tri-capture. Leaving the USB cable still connected to the computer. I tried the reinstall again and it worked.

try to manually install it through device manager in control panel. or simply try to install the drivers.

If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

Try this link:

https://community.netgear.com/t5/VPN-Firewalls/FVS318G-really-slow-internet-speed/td-p/1121096

The program you are trying to install is ether 64 BIT or not compatable

disable any programs that are resources hungry and disable any anti virus and try;otherwise try installing the software just after installing the new os

If you have more then one messenger you need to make sure that you are completely signed out and have them shut down before you try to install another one or it will not install successfully

first remove the usb cable attached to the pc, try to download the driver from official printer website complete file. then setup the installation when it ask to attach the usb cable attach to the pc

Is the download complete? If it is complete, you can try installing the application again. If it doesn't, try to identify if you have any programs in your PC that is blocking the installation of any application. These are anti-spyware applications or personal firewalls.

Or simply try downloading the YM again and re-install..

Download in google for free registry repair for VISTA and repair ur registry and try to install again...

Still not working,Try to install driver's on another location


And rate me as FIXYA please