20 Most Recent
Questions & Answers
The remote device or resource won't accept the
BEWARE SPAM NUMBER +1-800-532-4187 BELOW
First thing to check here if the pc is getting a valid IP address to do this go to Command prompt and then type IPCONFIG and hit enter the computer should have a 192.x.x.x IP address if it does do this next step on the command prompt type this command PING YAHOO.COM and hit enter check if you will receive 4 replies after you hit enter if you receive Request timed out there a chance that a security software is blocking the connection like a firewall so disable that firewall for the mean time , but if you receive 4 replies it means that internet is really working on the computer and there's just something wrong with your Internet explorer of
For internet explorer follow this, Click on Tools > Internet options > connections tab > Lan settings make sure nothing is check and also select never dial a connection then click OK and restart the computer..
Then after that try the internet if its working now....
Netgear wireless router has no lights after power
On the router, you will see some sort of ventilation for the air to pass try smelling from there and if you smell anything the smells like burnt plastic or rubber then the device itself is burned from inside because of the power outage, however, this is extremely rare case scenario I doubt it will burn like that so easily, and do perform the same step on the power source adapter of the router because in many cases it is the power source that gets burn and not the device.
After that perform some troubleshooting steps check if the power chord connected to the router is properly connected also please check the power outlet with other electronic devices to see if the outlet is working.
I am not sure but I am assuming that it is the power adapter that got damage and not the router. Let me know if any issues.
Lost password for netgear router wnb834b
Most of the NETGEAR devices, except ReadyNAS products and Fully
Managed switches, have the following default username and password:
- Username = admin
- Password = password
- For older devices, password = 1234
If you have changed the default password and have forgotten it,
you will need to reset the NETGEAR device to factory default settings
in order to use the default username and password. Click here to learn how to reset the NETGEAR device to factory default settings
. Please note: restoring a device to its factory default settings will erase any changes you have saved to the device.
Tp link tl-wr740n how to install without cd
simply, connect it via network cable (LAN socket), turn on, check your gateway ip address, then type it in web browser, name/password should be admin/1234 or admin/admin, inside set what you need...
Wifi stopped working
power cycle. if it still doesn't work then reset to factory defaults and set back up again from scratch.
How to install netgear wnr834b without cd
It depends on the ISP:If it's DSL (verizon, att, centurylink, etc)then you will need dsl login and password credentials. (PPPoE or PPPoA)some others dont require it (DHCP) so you need to call and ask themt o confirm these.you might also want to ask them about the ADSL settings: Multiplexng Method, VPI and VCI numbers. This will be very helpful.For CABLE connections (comcast, time warner, etc)it should be automatic. but if not try to search for MacSpoofing.http://kb.netgear.com/app/answers/detail/a_id/1086
Lost security key for netgear router WNR834Bv2
Have you checked the sticker on the router? Sometimes they actually print the security key on a sticker usually on the back or on the underside of the router.You can also get to the routers internal settings, which will allow you to see or reset the security key, by plugging your PC directly into the router and typing in:192.168.0.1 in your browsers address bar. This should take you into the logon screen for your router.If you need any kind of technical assistance you can contact support cell at http://www.vtechsquad.com/
Msg. conntected with limited access
Unplug the Router.
Unplug the modem.
Wait about 15-20 secs.
Reconnect the modem.
wait about a minute or until all the lights are solid on the display.
Reconnect the Router.
Wait about another minute until everything is given time to start up.
Try connecting again.
If it still does that, it may be a problem with your computer that your trying to access with wirelessly.
My mother had that problem on one of her laptops, it turned out that her particular installation didn't support WPA or WEP incryption. I did a full reinstall and now it works.
If you want to avoid a full reinstall you can try uninstalling the wireless network card, then reinstalling it.(Make sure you go to your manufacturers web site first to download the proper driver for your model)
I hope this helps,
Im getting interference from some
any metal objects or any appliances that transmit radio frequencies affects your connectivity thru wireless. make sure the path is clear especially where the router is located.
Router won't power on. Correct
May be a button on back of router to power on/off. If you have any other electronics you can compare voltages on power cords and make sure they match and try a new power cord. Generally though with routers if it has been fried by a surge of some kind there generally isn't a way to fix it, at least not in any way that will be cheaper than just replacing the router itself.
Not finding what you are looking for?