On some games on my psp its constently pressin down.

i paly first mach in fifa street world tour on ps3 slim 3.55 .... when i play secon game he stop...... please help me...

the thing is that ur home button is stuck wen ur playing a game if u press down the home button it will ask u that

It seems the problem is with the game, and it affects all platforms:
http://webcache.googleusercontent.com/search?q=cache:kmFJQIfSC5cJ:forum.ea.com/uk/posts/list/150/16803.page+fifa+2010+pauses

all chapters beat

there are two remedies for this problem 1st is your not using a firmware attached to this games .these are 6.00 firmware games so try to install 6.00 firmware and look iam sure the game will work,if your using custom firmware upgrade to 5.0 gen d2 and it will be ok 100% sure sometimes the games are patched to run in a firmware inferior than 6.00 so it will not play on 6.00 try downloading a non patched version (although i dont trust this remedy) if you think that i had spent sometime for your problem and did this for your sake rate this helpful and rate this helped you

This is piracy, and not officially supported by sony, check some home brew forums on info on getting this to work for your psp firmware version.

try putting in a UMD that what i did for mine games works find if that dont work go into recovery mode turn off the psp system and turn it back on and hold the r button and go to configuration then go to use no umd and enable it then exit then the games should work just find.

The first check the version you are running on psp, >> Go to the PSP Menu and move across to the "Settings Menu". Scroll down, select to "System Settings" >> "System Information" and you should see version of your PSP. If the UMD has a high version than ur console, u need to update ur psp.

see at my blog for psp update guides.

Hi tony27,

 

You go to the tools menu and select networking and setup the connection as AD-Hoc mode.  That should do it, its that easy.  Both PSP need to setup the connection as ad-hoc.

You might be holding it down while you are powering it up. It "looks" at where the stick is during power-up and sets that position as default center. Make sure you aren't touching the stick while you power up and let me know if this doesn't fix it.