To change the alarm settings on the Aqualite Men's Analog/Digital Watch, press the bottom left "Mode" button until you find the "AL" word next to your alarm time. Then let go of that button. Then press the top right (Start/Stop) button one, two, three, or four times to select your options (alarm on, alarm and chime on, chime on, alarm and chime off)
SOURCE: NEED AQUALITE MANUAL - CAN'T SET TIME
To set time:
1) Press "Mode" button until Time is displayed.
2) Press and hold "Lap/RST" button until seconds display starts flashing.
3) Press "ST./STOP" button to change selected entry.
4) Press "Mode" button to change from seconds>minutes>hours>date>month>day of the week>time format>date format
5) Press "Lap/RST" once you are done to set the time.
To set Alarm time:
1) Press "Mode" button until ALM is displayed.
2) Press and hold "Lap/RST" button until minutes display starts
flashing.
3) Press "ST./STOP" button to change selected entry.
4) Press "Mode" button to change from minutes>hours (remember to cycle through for AM or PM
5) Press "Lap/RST" once you are done to set the alarm.
To toggle alarm sounds on and off:
1) Press "Mode" button until ALM is displayed
2) Press "ST./STOP" button to toggle alarm sounds on or off (shown on display)
3) If alarm sound is shown on display, alarm will go off every day at the selected time. To turn off alarm once the alarm sounds, simply press any button on the watch.
SOURCE: Aqualite Alarm Chronograph 4 button watch
good after noon ! press the adjust button hold it up to 3 second when the digit is blinking thats time to set press the mode to select the digit that you want to change after that press the stert or reset button to change no digit ! thank you ! god bless !
SOURCE: aqualite stopwatch alarm
To set time:
1) Press "Mode" button until Time is displayed.
2)
Press and hold "Lap/RST" button until seconds display starts flashing.
3)
Press "ST./STOP" button to change selected entry.
4) Press "Mode"
button to change from
seconds>minutes>hours>date>month>day of the week>time
format>date format
5) Press "Lap/RST" once you are done to set the
time.
To set Alarm time:
1) Press "Mode" button until ALM
is displayed.
2) Press and hold "Lap/RST" button until minutes display starts
flashing.
3) Press "ST./STOP" button to change selected entry.
4) Press "Mode" button to change from minutes>hours (remember to
cycle through for AM or PM
5) Press "Lap/RST" once you are done to
set the alarm.
To toggle alarm sounds on and off:
1) Press
"Mode" button until ALM is displayed
2) Press "ST./STOP" button to
toggle alarm sounds on or off (shown on display)
3) If alarm sound is
shown on display, alarm will go off every day at the selected time. To
turn off alarm once the alarm sounds, simply press "ST./STOP" button on the
watch.
2,068 views
Usually answered in minutes!
×