Sc495 - IBM Infoprint 2085 All-In-One Laser Printer

http://terraofficesolutions.com/forum/index.php?topic=36.0

Quoting from the link above:

Ricoh Error Code 495, SC495 Fix - Printer, Copier, Fax Machine « on: October 02, 2012, 11:18:43 pm » The Ricoh copier error code 495 / SC495 is a toner recycling unit error code.

If you receive this error you will want to check:
Your Waste toner transport is nor working ( motor overload )
Check Toner end sensor detective, (is not connected )

If the problem persists you may need to contact a local service technician to take a look at your copier.

Contact us by phone, email, or reply to this post with any questions you may have, we can always help.

Steve Jensen
[email protected]
(760) 580-4190

Most likely the toner dispenser is blocked. Its not getting the ink into the system. Did you shake the bottle well to be sure its not packed inside the bottle?

hi rips,

Good day!Check the seal inside the tonerpump in the drum..maybe its broken..I think you should buy a new one..

mastergani

Hi
Clear or change the Tubes for Tonertransport, look for the Toner pump.
Often the Seal inside is broken, and u dont get enough toner, mostley
u can hear it, Look at the tonertransport from Tonerbank the coil must
bring enough toner to the collector from where its go to the devbox,
when u have problems with full tubes its better u give new one
because problems will come back to you

Pls vote us to keep us alive

SC495 is generally a problem with the toner recycling system in a Lanier copier. Without knowing the specific model, I can't give you any more information. What model copier do you have?

normaly its the toner bank sensors if you have replaced thet check the waste toner clutch if you cant solve it that way vacuum all the toner pipes in some casses they are blocked

check the door contacts and the contacts on the transfer unit these need to be clean also

SC495 is a toner recycling system error, due to strain on the system. Most likely due to a blockage. system needs to be removed and thoroughly cleaned. J013, is simply a jam, and this would be happening because of the toner recycling system being locked up, and seizing the motor. You DEFINITELY need a tech for this.

check this link, look under error codes


http://checkitright.spruz.net/main.asp?page=dp&dis=592197