20 Most Recent Philips GoGear Flash MP3 Player - Page 2 Questions & Answers

how cn u unlock it

It's because sira

Please get downloaded here : www.userdrivers.com/MP3.../Philips-GoGear-SA1VBE04AC-17-MP3-Video-Player-Firmware-Update-6-38/
MP3 Player > Philips">www.userdrivers.com > MP3 Player > Philips
www.brothersoft.com/downloads/philips-gogear.html

Hello :

Your GoGear may not respond to button presses from time to time. This is often caused by an error in the operating system and can be fixed by resetting the device. Resetting the GoGear is similar to rebooting your computer. You will not lose any of the data uploaded to the device. To reset the GoGear, press the "Reset" button located on the left of the device. The screen will go blank for a few seconds and then turn back on.

If the GoGear freezes after uploading a file to the device or if one song or sound file freezes the device each time you play it, the file is likely corrupt and needs to be removed from the GoGear. Connect the GoGear to a computer and delete the file from the device.

PLEASE DON'T FORGET TO RATE !

This player supports WMV, MPEG-4video formats that will play with this unit.

Try doing a soft reset.

1. Insert a small pin or unfolded paperclip into the reset hole located at the back of the player.
2. Hold until the player shuts down.
3. Power on the player again by using the Power on/off key.

see if that helps. ~Daniel.

There should be a switch near the bottom, the same switch that allows you to lock it. You just pull it the other way and hold it down. A message should display that it is shutting off.

Ok, please note that the videos downloaded directly from the internet may not work properly on the player. You have to first convert them into a format that is suitable to the player using Philips media converter.

Download the Philips Media Converter software. Make sure corresponding Codec for playing videos is installed before downloading. The codecs are required to play videos on your player. To download Codec, you can:

1. Go to www.download.com/windows
2. Search for "directshow codec pack"
3. Download and install one of the codec packs from the list of results

Now to download video, connect your player to the PC and click the icon "Internet video downloader" at your desktop.

Open the youtube site. Move the cursor over the video you want to download until you see the Download icon. Double click on the icon to enable download.

After downloading, the Media Converter for Philips will then start to convert the video to the format that suits your player. If your player is connected to the PC, the video will be transferred to the player automatically.

Check the specification of your MP3 player to determine thetype of video file format it uses. Most common video files that MP3 players use are, AVI andWMV, there may be others such as FLV, MOV and DivX. If your player cannot play a video then it is anincompatible video file format, then you need to convert that video file to aformat that your MP3 player uses. Click on this link for instructions on converting videofiles for MP3 players :- http://www.fixya.com/support/r5874192-play_videos_mp3_player

http://www.philips.com

I had the exact same thing happen! It was driving me up a wall trying to figure it out. Finally I decided to go to the START menu and hit RUN. Figured I'd go to the E:/ drive and see if I could do something from there.
A little box popped up, saying that the device was not formatted and asked if I'd like to format it. So I hit yes, read the lil info that popped up on the boxes, and clicked the QUICKFORMAT box. That seemed to do it for me, my device took the music back on it.
Hopefully that works for you. Typically I'm a Zune fan, but mine I had for 6 years and it finally croaked on me. Plus I needed something small to take with me jogging and this seemed to be the perfect solution. If that doesn't take care of it, I say take it back to the store and get it replaced or get it repaired.

which type of conveter use in ipod

Check the specification of your MP3 player to determine thetype of video file format it uses. Most common video files that MP3 players use are, AVI andWMV, there may be others such as FLV, MOV and DivX. If your player cannot play a video then it is anincompatible video file format, then you need to convert that video file to aformat that your MP3 player uses. Click on this link for instructions on converting videofiles for MP3 players :- http://www.fixya.com/support/r5874192-play_videos_mp3_player

plug in the usb cord to the mp3 player plug the other end into your computer wait for windows to recognize the new device you will see a new folder in my computer (named gogear, or d: or something) drag and drop music (or copy and paste) mp3's into that folder
~or~
Install software like Rhapsody or Songbird and hope they are compatible and will sync. (most mp3 players are compatible)

You can register your product at this link:

http://www.welcome.philips.com/welcome_en_US.html

Also you dont need to keep a receipt once you have registered. As the warranty will be validated by the Date of purchase listed in your registration form. You can confirm this by contacting Philips support.

Refer to page 12 of your User Manual.
http://download.p4c.philips.com/files/s/sa3346_37/sa3346_37_dfu_aen.pdf

Connect to your PC with the supplied USB cable and it will charge via the PC USB port.

Here is the manual: http://download.p4c.philips.com/files/s/sa2cam08k_97/sa2cam08k_97_dfu_aen.pdf