20 Most Recent NetGear RangeMax NEXT WNR834B Wireless Router - Page 2 Questions & Answers

As per the information received it indicates that your router is rebooting intermittently. This clearly indicates fault with the router. I would recommend you to replace the router.

I hope this information allows you to resolve this issue. Please revert back for any more assistance on the same.

Regards

Anand

Unfortunatly, if it won't even power up anymore, there no way to even diagnose what the problem might have been. sorry to say, but i think it may be time for a new router.

If you haven't changed the default password (user admin and password as password, or if that doesn't work try 1234) try to log in with that, if that doesn't work you will need to reset the router to the factory settings to get in with the default user and password which is the above one. Note that you will lose the ISP settings and wireless settings when you reset the router.

Here's a video on how to reset the router to the factory default settings: http://kbserver.netgear.com/media/flash/training/Troubleshooting/NG_WGR614V9Router_TS_LostPassword.html

Your solution can be found here: http://kb.netgear.com/app/answers/detail/a_id/1148/~/default-password-for-netgear-devices good luck

contact your service provider.

Hello;
You connect a Computer via Ethernet to the router. Then, in the browser enter the ip address of the router. To get it you have to:

1. Click START'RUN
2. Type cmd and hit enter.
3. type ipconfig and copy the default gateway address
4. Go to the browser and type the IP address into.

Once there, on the management page of the router, you can configure what you need.

Go to NETGEAR Router.

Go NETGEAR Router and configure.

No, you don't need any cd for drivers. All you need is just to enable the Wi-Fi at your laptop (in case it is not already enable) and let the laptop scan for wireless networks. After a while a pop up will prompt you to choose the wi-fi you want to connect to. Choose your own, when asked type the password (in case of a secure wi-fi) and connect.

In case of a problem or clarification, or something isn't as described, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct fixya link: http://www.fixya.com/users/technical114

Howdy.We are not connected in any way with Netgear, but I hear your frustration. Since you have only one ethernet plug,I wonder if you might try using the new netgear rangemax instead of the other netgear router rathern than with it. They suggest you use these with the rangemax:
"We recommend using this product with the RangeMax Next Wireless-N Adapters (WN511B, WN311B, WN121T"
Good luck with your situation, I'm rooting for you:)
farmerbear at FixYa.com

You can add more ethernet ports by purchasing a 4 port hub or 8 port hub.
Connect a LAN cable from the Netgear wireless router to one of the ports on the hub and then connect the other computers to the ports on the hub.

i wrote this up the other night, it is where you need to go to configure your wireless password. click on the link above and follow through the instructions. your will vary a little but pretty much the same Cheers

mostly u will be getting more security options oly with the high-end wireless devices. apart from the default security options, u can secure ur wireless network by many ways. turn off dhcp server in ur wireless router or access point. so it avoids unauthorized users from accessing the network. instead u may give a static private ip address for each and every wireless users for getting wireless access

Are you trying to set up the router.
You can do it manually without the CD.
Make sure that your computer is able to go online through the modem.
If your computer is not able to go online through the modem then you will need to call ISP first.
If your computer is able to go online through the modem
then you need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

How to secure the wireless network

You want to secure the wireless network.
Is there any computer connected to the router with the Ethernet cable?
If not then you will need to connect the computer to the router with the cable.
Check the IP address on the computer. Open the router set up page.
Once you open the set up page, you will find the option to make it secured

Click Here for step by step instructions