Top 20
Linksys SD208 8-Port Ethernet Switch (SD208KIT) Questions & Answers
Not all ports working
Sounds like you may have some wires cross between your switch and your router. And if someone worked on your pc, there probably something wrong with it too. Most places dont know how to fix a computer they just reinstall the OS and hand it back to you, less the unique drivers from your computer mfg for hardware such as network adapter drivers. Connect dirctly to the modem and got to dell support or whomever and check drivers
I bought a new pc,
hi,
this is a default check that windows does when a new network is detected "wireless or wired"
you must select the type of network this device is connecting too(public/private/home). for the most part you would select home.
do you get on the internet after choosing one? as either way you should be on the internet
GL
hope this helps
Don't forget to vote for me
Thank You
Jammer
How to enable DHCP on
HI
The linksys sd208 is a switch and switches do not have a DHCP servers. You will have to look at your router or if you have a server for the DHCP server.
Set up difficulties
You sure can. Start w/ the Comcast modem as long as it is NOT a USB type and hooks using a CAT-5 cable (regular network cable). Hook the comcast modem to the WAN port of the wireless router. On the back of the wireless router use the normal 1-4 extra LAN ports to hook other computers or the SD208 switch to it and other computers from there.
Word of advise if using Wireless Router, be sure to read manual and set a KEY for your network to secure it from unwanted outside use.
Linksys SD208 8-port switch
you have to lay it on his back and pull a screwdriver under the dark front plastic and click it off by turning and then the above metal part.
Networking
Yes, but you'll need a crossover cable to connect the two routers. You could buy a hub or a switch. They are easier to configure and cheaper.
Why is my Linksys WRT54G wireless-g router not being recognized anymore?
just fixed one yesterday.
the power pack was no good.AC wall wart,
power green LED blinked endless. and the white logo, LED is dead..
a new pack fixed it.
also the wrong pack used, ! do not mix them up. oops.
first year 54G, v1 uses 5vdc pack.
at v2, and up all want to 12vdc pack,
bottom sticker on above failed was v6.
you said recognized, does that mean the 4 rear Ethernet wired jacks are dead, or just wifi dead.?
first the ethernet ports must work, or wifi is doomed.
2/17/2020 9:50:50 PM •
Linksys...
•
117 views • 0 helpful votes
How to fix Linksys router error 321 ?
Good day,
This might be of help .
Steps To Fix Linksys Router Error 321:-
Step1:- Check the Firewall Settings
To check the Firewall Settings is the first priority for the users. Then check the firewall settings of the computer/ Laptop, will be helpful to find the problem. If there is any firewall installed on the computer, so the users need to turn it OFF.During the process, the users ensure that the Local Area Connection on the computer is not disabled. The Local Area Connection should not have any static IP address assigned. If there is any then the users need to immediately set the IP address to automatic.
Method2:- Run the Installation CD Again:-
The users require trying to run the CD again and ensure when the CD runs, it will ask to connect the computer and the modem to the router with the cable. So the users will need to notice, that there all the lights lit up on the router. If it's not, then users will need to setup their router without the CD.
The users can get the instruction to setup router manually in the method 3.
Step3:- Try to Setup Router Without Installation CD
Setup Linksys Router without Installation CD is another best option for users in order to completely avoid the in order to fix Linksys Router Error 321.
Follow the below-given instruction to Setup Linksys Router without Installation CD:
First of all, connect the main computer to the Ethernet port on the router.
Then the users need to connect the modem to the Internet port on the router.
Now it's time to verify the status of the light that is blinking properly.
Next, users need to open the setup page of the Linksys Router and then change the Internet connection settings manually.
In the setup page of the Linksys Router, the users can change the settings of the router as per their needs.
Then the default IP address of many Linksys router is 192.168.1.1. And the default username and password would be an "admin".
Wait for a few minutes, when the main computer is able to access the Internet, so users need to create a wireless network for their wireless computers/devices.
or you can call them @ Toll Free 1-800-204-6959 that is Lynksys support.
1/24/2020 7:31:16 AM •
Linksys...
•
103 views • 0 helpful votes
How to Set Up Linksys WRT54G Wireless G Router
The vent actuators are bad. there should be two. one on each side. they are small toy like motors that open and close the vents from within to allow the hot air to blow by closing the vents to the a/c unit.
11/21/2019 4:52:36 AM •
Linksys...
•
60 views • 0 helpful votes
Not finding what you are looking for?