20 Most Recent
Fuji FinePix E900 Zoom Digital Camera - Page 4 Questions & Answers
ZOOM LENS BROKEN
Most of the digital camera,the zoom lens is the most costly parts,you should consider it to sell it for parts.
Camera freezing
Defective mechanism, a stucked mechanism is present. camcorder are smart it can detects error and shuts down itself for safety. earlier models dominoes the defect if the user is not quick enough to react when something goes wrong with the camera. You need professional service to fix it.
try tapping side by side, it always works!
FinePix E900 battery problem
The support desk at Fujifilm got me to insert new batteries (rechargables) and try again. The batteries did not die but in the viewer, the picture is very bright (white) and has close horizonal lines running across the picturere. They want me to send it in by registered post (cost to me), only give a quote after inspecting it - which is far enough, but if I don't go ahead with the repairs, it will cost me $40 to get the camera back (as if it would be any good to me). Their web site states that the average repair is about $120, but it could be lots more. When I paid nearly $700 for the thing I expected it to last more than just over a year.
I rang several camera repairers who all told me that the only place that can repapir Fujifilm is Fuji themselves. This is not good and I won't be buying another Fujifilm again.
Focus error finepix hs10
About the HS10 autofocus problem, I discovered the cause and solution. It is a problem of camera design, and is caused by three screws securing the CCD sensor. These screws are not properly secured and the vibration eventually dropping.
In two cameras with the same defect, the screws were loose. These screws adjust the sensor position relative to the lens and the sensor is loose when out of position not allowing proper focus.
The solution is to disassemble the camera and secure the screws.
These screws can not be too tight they need to be adjusted to position the CCD sensor correctly. The camera is difficult to dismantle because several wires are soldered.
Care must be taken to discharge the capacitor of the flash, this may cause an electric shock and burn the camera board.
Those who want to try the repair, follow the link to the service manual.
http://elektrotanya.com/fujifilm_finepix_hs10_hs11_sm.pdf/download.html
Milton Maenishi
I have a FinePix S1 and the display screen is not working. All other modes are working but no display
Many occasions LCD on camera display never fails but back light fails unless physical damage to LCD screen. Hold a torch to display when camera is on you will see faint(black and white) image means LCD is ok but back light is failed, it's replaceable but needs little skill to replace. Or replace full Screen with backlight. This is easy. Just remove back cover, remove display by loosening flex lock, put back new display carefully lock it holding flex with one finger. Please do not touch display flex contacts.
Not finding what you are looking for?