Fuji FinePix - Recent Questions, Troubleshooting & Support


Does the screen work in menu mode or playback? If so then the shutter may be stuck in the closed position. Compact and bridge cameras work on "live view". The picture is live feed from the lens. Obstruction to the sensor (usually the shutter) will prevent live view.

Fujifilm Finepix... | Answered on May 19, 2020


Yes. Remove the memory card and connect it to your computer. Then search the internet for a file retrieval software.

Fuji Finepix... | Answered on May 19, 2020


I have been using a bit of edge sharpening lately in combination with smaller & smaller amounts of overall USM. I know Thom Hogan's CD for the S2 had his version as a PS Action and there are others that do the same around. I eventually made my own custom action for it. Can be used most effectively to sharpen an image while leaving noisy areas alone.

Fuji FinePix S3... | Answered on May 09, 2020


Hi,
I am afraid that there is only a small percentage of luck that your camera isn't destroyed. If it was in the bag with the wine for a long time then the wine certainly went into the camera circuits.
What you can do is take it to an electronics service shop and ask them if they could open it, remove the components and clean them with special solutions to remove the sticky wine.
Hope it works.

Fuji FinePix... | Answered on Mar 06, 2020


The error appears when the device does not respond to the software. Try rebooting the device and updating again. Here there is a guide to reboot your device: http://support.microsoft.com/kb/940705#C00D124D.

Fuji FinePix... | Answered on Jan 28, 2020


Try a picture recovery program. This one has a good reputation.
http://www.asoftech.com/apr/

Fuji FinePix... | Answered on Sep 23, 2019


You're right. Formatting in-camera will only reset the two File Allocation Tables, which act as a pointer to where the data really resides. The data (pictures) should remain safe until they are overwritten (the File Allocation Tables will have been marked to show their positions as being overwriteable). There are lots of solutions, the most expensive, is to send the card to a data recovery place (I don't know from your profile, where you are, but Fuji UK has a very good data recovery department, for just such a problem). Another way, is to use data recovery software. These, on the whole, work very well, and vary in price from zero, to a few hundred bucks. I've found little difference in quality between them. However, the easiest and currently most popular, seems to be F-Recovery... http://www.filerecoverytools.com/products/fr_smartmedia/ It is no better than most of the freeware tools out there, it's just easier for a novice to follow.

Fuji FinePix... | Answered on Sep 19, 2019


Dear Deemax1,
There are hundreds of software available on internet to convert avi to wmv or to any other file format. I searched Google with "avi to wmv converter" and I received about 5,250,000 results. Please download any free software and that should do the trick.

Hope that helps. Please let me know in case any further assistance is required.

Regards,
Srinivas.

Fuji FinePix... | Answered on Sep 17, 2019


OK SANDISK is just a brand name, you have to use a XD card, sandisk makes xd cards along with other brands as well....

Fuji FinePix... | Answered on Aug 25, 2019


Use a card reader to download your pictures to a folder you create on your desktop.

Fuji FinePix... | Answered on Jun 19, 2019


This question is too old; however, assuming someone with similar question can be informed of the same.
Most cameras (brand/model) will require an associate software for use in tether mode. For Fuji, it would be Fuji Camera Remote application - Fuji-hyper Utility software, Canon EOS - the EOS Utility etc. Without the software, your camera becomes a SD card holder when it is connected to a computer. You can't do anything with it.
(There are exceptions though - for instance, a Sony Cyber shot DSC W30/ W40 future a AV out jack that can project AV on the computer or TV)

Fuji FinePix S20... | Answered on Apr 02, 2019


If they don't open in windows media player, try downloading VLC media player, it'll play basically anything: http://www.videolan.org/vlc/

Fuji FinePix... | Answered on Mar 22, 2019


try to pull it up to get it out and then choose the lightning button to activate flash....

Fuji FinePix... | Answered on Mar 18, 2019


About the HS10 autofocus problem, I discovered the cause and solution. It is a problem of camera design, and is caused by three screws securing the CCD sensor. These screws are not properly secured and the vibration eventually dropping.
In two cameras with the same defect, the screws were loose. These screws adjust the sensor position relative to the lens and the sensor is loose when out of position not allowing proper focus.
The solution is to disassemble the camera and secure the screws.
These screws can not be too tight they need to be adjusted to position the CCD sensor correctly. The camera is difficult to dismantle because several wires are soldered.
Care must be taken to discharge the capacitor of the flash, this may cause an electric shock and burn the camera board.
Those who want to try the repair, follow the link to the service manual.
http://elektrotanya.com/fujifilm_finepix_hs10_hs11_sm.pdf/download.html
Milton Maenishi

Fuji FinePix... | Answered on Jan 05, 2019


Many occasions LCD on camera display never fails but back light fails unless physical damage to LCD screen. Hold a torch to display when camera is on you will see faint(black and white) image means LCD is ok but back light is failed, it's replaceable but needs little skill to replace. Or replace full Screen with backlight. This is easy. Just remove back cover, remove display by loosening flex lock, put back new display carefully lock it holding flex with one finger. Please do not touch display flex contacts.

Fuji FinePix... | Answered on Dec 21, 2018


I had a Finepix camera and on it was a feature for image stabilising. On the display it showed a hand. Have a look for it on the menu

Fuji FinePix... | Answered on Oct 29, 2018


Remove the battery for 20 mins. then replace the battery, then go to the camera's menu and set the Date & Time.

Fuji Finepix... | Answered on Oct 28, 2018

Not finding what you are looking for?

-1,391 questions posted

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Ekse

Level 3 Expert

13434 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Fuji Cameras

  • Forum

View Most Popular

  • Fuji Cameras
Loading...