20 Most Recent
Questions & Answers
Runs thru batteries very within 2 or 3 uses.
This is not unusual for many cameras. They draw quite a bit of battery power, especially if you leave the LCD view screen on constantly. You will get longer usage id you limit the use of the display screen and use lithium batteries rather than rechargables. Costs more, but you won't lose tha shot when the batteries give up.
Camera wont connect to mac
I've had this happen before. By chance, Do you have a CD or DVD in your Mac? Eject any disk you might have in there and try the connection again.
I have Fuji FinePix 2650 Digital camera with same problem. I can almost guarantee this is not a firmware problem. I went mountain biking a few months ago and take pictures. I take out camera and turn on. I get lines then white screen. I banged on camera and fixed it. Later a few weeks ago I turn it on and white screen. i beat this thing and get bad menu selection screen for a moment then white again. It takes pictures well and talk to computer no problem but no LCD picture. I thinking it is loose connection for LCD. Send it for repair or if you seek adventure try to fix it yourself!
Sensor failure. Washy, distorted picture. All funny colours.
On this link you can find all software and updates you could wide for, from Fuji, that you could need with your camera. There never was a firmware update for this camera, So i'm afraid you won't find that on the fuji site. Support and Contact Center
Displya date on the photo
The date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to print your pictures. Depending on the program and printer you may print the date on the image, in the margins, or on the back.
Hi I have a panasonic FX 50 camera and i am trying
Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa ( http://picasa.google.com ).Make sure you format the card after the downloading.
My Fuji S5000 has developed a problem. The screen
Sound like a malfunctioning
CCD-image sensor. Rare, but possible problem with your LCD screenviewer... in both cases (LCD or CCD) this isn't a job that you could solve yourself; this wrong
images or abnormal colors, scratchy purple lines, blank or black pictures,
and/or black videos with good sound being recorded on the camera's flash
suggest check THIS LINK for additional details in this previous solutions for an Defective
CCD (Charge Coupled
Device) and next contact your Samsung service. I strongly suggest (taking into consideration the age of your camera) to
evaluate the cost of
repair versus the
cost of a new camera with similar features, before making a final desicion.
Hope this helps; also keep in mind that your feedback is important and I'll appreciate
your time and consideration if you leave some testimonial comment about
Thank you for using Fixya, and have a nice day.
I have a Fuji FinePix S5000 and the battery door
I had this problem also (see below).
getting poor results with the duct tape solution, I discovered another
work-around. This should work whether it is chipped lugs on the door or
on the body.
Firstly I used an old camera flash bracket that
screws into the tripod socket, and this holds the battery door in place
quite securely. However it was too long, so I cut and filed a piece of
aluminium 25mm (1") wide by 2.5mm thick to the right length (around
100mm/4") and shape, and made a hole for the bracket screw.
End result is not exactly like new, but more functional than the duct tape and does not further damage the actual camera:
Not finding what you are looking for?