HP LaserJet 4345mfp Printer - Answered Questions & Fixed issues
I've tried to reset the maintenance-kit counter
You can try to go in the service menu.
You can find this in the administration menu, go all the way down and you will see "service".
You need to insert the service code : 11434506
From there you can reset the maintenance count i guess.
5/9/2017 11:27:09 AM •
HP LaserJet...
•
Answered
on May 09, 2017
•
109 views
Config page on hp4345 without menu button
You would need to log into the embedded webserver to view the configuration page. From there you could screen capture it as I do not believe that the print config page was added until later models.
10/31/2014 4:59:49 AM •
HP LaserJet...
•
Answered
on Oct 31, 2014
•
158 views
Hp 4345
Check ADF unit (automatic document feeder) working condition.
For diagnoses : Insert few paper(ex:10papers) in ADF unit & do copying, if UR succeed in copying, ADF is working well.. If not check the fault.
HP M4345 facilitated with digital sending option., for configuring digital sending U need to create shared folder with fully permissions in system. Better visit hp site or google to know about how to create folder.. You can do multiple scanning once configuration completed successfully..for more info visit:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c02720194-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1409945500358.876444892.492883150
9/5/2014 7:33:42 PM •
HP LaserJet...
•
Answered
on Sep 05, 2014
•
352 views
49.4 C18 laserjet 4345
49.XXXX is a fatal catch-all error. Could be firmware problem, network, print job. If the error occurs when you try to print, clear the print queue. If the error occurs when the printer is just sitting idle, reseat the formatter. Try powering on without the network cable attached. If it still happens replace the formatter. Could be a corrupt print job being sent to printer. Print something else.
7/19/2014 6:02:52 AM •
HP LaserJet...
•
Answered
on Jul 19, 2014
•
855 views
58.04 error
58.XX ERROR To continue turn off then on
A memory error has been detected.
58.4 = Engine power supply
Replace the Engine power supply assembly
(100-127 volt) is part number RM1-1041-000CN
(220-240 volt) is part number RM1-1042-000CN
6/6/2014 2:51:23 AM •
HP LaserJet...
•
Answered
on Jun 06, 2014
•
529 views
49.4 C18
dear friend,
494 c18 error belongs to 3 reason
1- check ur print server Que may be any junk file will be there or error documents will be there.(if you are using windows 7 then it easy to solve}
2-- printer firmware problem- update your printer firmware latest,
3 - check your formatted board
3/28/2014 9:41:16 AM •
HP LaserJet...
•
Answered
on Mar 28, 2014
•
112 views
Slow print come out with hp laserjet 4345 printer
dear friend,
for slow print many reasons:
1- check tray adjuster
2- check tray customs or standard lock( it will be right side tray lock)
3- check your printer driver
4- check printer firmware
5-check printer fuser
these are the reasons printer work slove
3/28/2014 9:37:07 AM •
HP LaserJet...
•
Answered
on Mar 28, 2014
•
146 views
Error 13.33.00 hp 4345
13.33 = Paper jam inside top cover area. The paper didn't arrive at the paper-delivery sensor on time. This is usually due to worn out paper pick and feed rollers in the paper trays. Replace the rollers and you should be good. This error also occurs if your paper has a high moisture content, is the wrong kind of paper (too thick or too thin), or is loaded in the paper cassette incorrectly.
3/16/2014 1:06:39 AM •
HP LaserJet...
•
Answered
on Mar 16, 2014
•
245 views
Error 13.33.00 hp 4345
Paper jam inside top cover area. The paper didn't arrive at the paper-delivery sensor on time. This is usually due to worn out paper pick and feed rollers in the paper trays. Replace the rollers and you should be good. This error also occurs if your paper has a high moisture content, is the wrong kind of paper (too thick or too thin), or is loaded in the paper cassette incorrectly.
3/16/2014 1:05:54 AM •
HP LaserJet...
•
Answered
on Mar 16, 2014
•
772 views
Red light start button
the problem may be the scanner are you able to scan to pc or email/fax from the machine glass/
when the machine initializes are there any faults displayed ( the printer will continue to function even if the scanner fails) usually the error code 30.01.02 or something like that will be displayed-
the scanner is connected via 1 large connector found to the rear of the machine - does the cable look damaged in any way- is the connection 'good' has the grounding wire worked loose, if after these have been checked there is still no scanner then you may need either a scanner or main PCA/formatter fot the printer.
Belmonte business are able to help with the repair of this unit should it be required and would be subject to the usual costs.
available on 0161 480 5556
1/30/2014 10:05:53 AM •
HP LaserJet...
•
Answered
on Jan 30, 2014
•
1,387 views
We've been having issues with our office printer. Yesterday we had to restart the machine due to it not printing when we selected a job from our computer. Today, I was making copies and it said "Err
the hp 4345 is a very reliable piece of kit they suffer generally from the fuser swing plate and ADF mylar failures. if you can give me some more details I.e. we had to restart th machine due to it not printing- has the machine been allowed to come to ready? if so is it possible to take a simple copy from the glass ? if it comes to ready and is able to make a photocopy and your still not able to print then the error lies between the IO card and your computer. try reinstalling the printer driver if that is the case. please when giving information about err??? please include all characters seen on the display an example fault code would look like error 59:00 with a possible expansion code of 0c00340021 these are the important details that tell the engineer which part in the machine is being reported as failed without these details you may as well just say my printer aint working whats wrong with it ( Actually that is exactly what you said).
1/17/2014 2:23:14 PM •
HP LaserJet...
•
Answered
on Jan 17, 2014
•
35 views
Hot error
you have the wrong type of fuser - probably HP 4200/4300or 4250/4350. these units look IDENTICAL the correct fuser unit assy part number is RM1 1044 a small white barcoded sticker should be present with the part number on the base plate of the fuser unitt
1/16/2014 3:05:08 PM •
HP LaserJet...
•
Answered
on Jan 16, 2014
•
83 views
Not finding what you are looking for?