20 Most Recent Lexmark T634 Laser Printer - Page 3 Questions & Answers

If you have replaced the engine board on your Lexmark C935 printer and are still experiencing an error 905.01, there could be a few other possible issues that may be causing the problem. Here are a few things you can try to troubleshoot the issue:

1. Check the printer's firmware: Make sure the printer's firmware is up to date. If the firmware is out of date, it can cause errors like 905.01. You can check for updates on the Lexmark website or by contacting Lexmark customer support.
2. Check for any visible issues: Inspect the printer and its components for any visible issues that may be causing the error. This can include debris or foreign objects that may have gotten stuck in the printer, or damage to the printer or its components.
3. Check for other issues: If you have checked the firmware and there are no visible issues with the printer, it is possible that there is another issue causing the error. You may need to have the printer serviced by a professional to diagnose and fix the problem.

I hope this information is helpful. If you have any further questions or need additional assistance, please don't hesitate to ask.

There is a video. https://www.google.com/search?q=Lexmark+office+edge+4000+print+head+removal ..

Unfortunately not for that model https://www.google.com/search?q=Lexmark+office+edge+4000+%22service+manual%22& ..

You should be able to download a Vista driver for the 2300 series from http://downloads.lexmark.com/perl/downloads/downloads.cgi

Hi, Please remove the toner/ink cartridge out and shake it 4 or 5 times before placing it back into your printer and testing a few prints. Lexmark also recommends checking for packing material on the imaging unit. Thank you.

You are going have to find a retailer that has what your looking for Lexmark constantly updates their printers so most items are no longer available, if there is a computer company close by check with them or check either Amazon or Ebay.

Check the power supply for bad capacitors or take it in for service. https://www.google.com/search?q=Lexmark+6747 ..

this might help https://www.techwalla.com/articles/how-to-reset-a-toner-chip-for-a-lexmark

printer uses USB A to USB B Printer Cable readily available on line less than $10.00

There are no controls on the Output Tray, only on Paper Trays. http://publications.lexmark.com/publications/lexmark_hardware/MS81x/UG/pdf/Lexmark_MS81x_UsersGuide_en.pdf https://www.google.com/search?q=Output+Tray+status+lexmarK ..

http://support.lexmark.com/index?page=content&id=SO3848&locale=en&userlocale=EN_US http://support.lexmark.com/index?userlocale=EN_CA&locale=EN&page=content&segment=SUPPORT&productCode=4039_FAMILY&id=SO1748 https://lexmarkprinters.livejournal.com/6646.html http://support.lexmark.com/index?userlocale=EN_CA&locale=EN&page=content&segment=SUPPORT&productCode=4039_FAMILY&id=SO1748

hi find link https://www.helpowl.com/p/Lexmark/X5630/Research/160781?search=lexmark%20x5630%20ocr%20software

hi find link for video https://infoserve.lexmark.com/ids/idv/video.aspx?category=Multifunction+Products&productCode=Lexmark_XC4140&topic=v34899506&vId=CX725x%2Ffuser_remove&ar=16%3A9&ap=1&l1=4&l2=3&sh=657&sw=1366&loc=en_PH

110% faulty Printhead. Part required is PN: 40x4463
Easy repair, both side panels and top cover removal then just unbolt the Printhead and replace.

could be wrong item or if its a generic it might not work

hi therefirst of all double check that printer is Airprint compatible:http://support.apple.com/kb/ht4356if it is you should be able to print no problemsif it isn't your best bet would be to download a good printing app, i personally use print n share

You did not say what version of windows you are using but the most common fix is to delete the printer and if it asks if you want to delete the driver files say YES. Then reboot the computer and it should reinstall the printer.

Sounds like you need new printhead. Take a look on amazon for replacement, here: Genuine Lexmark 100xl 100 Print Head 14N0700 14N1339 Printhead for Lexmark.... I hope this was helpful, Cheers

For the majority of the Lexmark printers, all that needs to be done is to set the paper size and type the same for each drawer. Example - drawer 1 & 2 sizes are set to letter, drawer 1 & 2 paper types are set to plain. Set up this way, when drawer 1 empties, the printer will automatically switch to drawer 2 to supply the paper.

To reset the maintenance count 1. Turn off the printer 2. Press and hold the 2 and 6 buttons simultaneously. 3. Turn on the printer. 4. Release the buttons after 10 seconds. The Configuration Menu appears on the LCD. 5. Touch Reset Maintenance Counter from the Configuration Menu. 6. Reset Maintenance Counter appears in the header and Yes and No appears below the header. 7. To cancel the reset operation, press Back or No. All other button presses are ignored. 8. To initiate the reset operation, select Yes. The maintenance count resets to zero and the LCD returns to the Configuration Menu