20 Most Recent
Questions & Answers
What does "flushing buffer" mean
No response from the original poster as of 6/6/09.
Normally, a "Flushing Buffer" message is pointing at a Postscript problem.
A quick easy test would be to set the printer for PCL and retry the job. If it works, then you really need to look at the PS print file to find the error.
on Oct 25, 2018
900,83 service rip software
Likely the engine card is bad. You must replace with a new one, this model of Lexmark will not allow you to remove a card from another used printer and install it. Same goes for the formatter and control panel on the printer. The three components are electronically keyed together the first time the printer is turned on.
on Oct 04, 2014
T644 Default Paper Source Problem
On the left side, near the pichup roller, of the tray there should be a "flag" hanging down in the elips hole. See if it is hanging down or stuck in the "up"position.
If so pul it down and the machine should work fine again.
on Jun 28, 2013
Not finding what you are looking for?