Hitachi LG GSA-4120 DVD+-RW/RAM 12x Burner W/ Dual Layer Support (GSA4120) Burner - Answered Questions & Fixed issues

Hi,

if it was sitting on top of the disk.
it must have been attached to the top-underside of the dvd drive.
this would usually act as padding or a buffer.
the only way, is to open up the drive, and re-fix or glue to the centre of the drive lid/top.
heres your only other option:-
If the front drawer is removable, or detachable. cut a piece of double-sided sticky tape. to the exact shape of the foam ( washer ) we,ll call it. stick to the washer. remove the other side of tape. place the washer on the centre of an old CD. manually eject the cd drawer ( Powered Off )
place the sticky sided washer on the centre of The CD. and place in the drawer. use a spatula or thin Knife, under the CD. to lever the cd, and sticky washer, back to the ceiling/roof of the drive. where it came from.
ensure it,s central. This is just a suggested Thought. And will require some thought before attempting it.

Mike @ Compurepair.

the laser is probably dead.only solution is to replace them.

Hi Iuly,

• First, open the Device Manager and uninstall the drive.
  

• If you need instructions on how to open the Manager, here is the link: http://support.microsoft.com/kb/283658
  

• Download and install CCleaner (free) from Piriform
  

• Run the cleaner to remove old un-needed temp files
  

• Select the StartUp tab and look for any programs that you know you installed but no longer use or need, and disable them. Caution, do not disable any system files unless you absolutely know what they do and that you do not need them.
  

• Run the Registry cleaner, when asked if you want to backup the registry, select YES, and save to a file you will remember just in case. I have used this program hundreds of time on many different system and it has never caused a problem, but you want to be safe, backup the Registry.
  

• If asked about a particular file that it wants to clean, select "yes to all"
  

• Reboot
  

  • CCleaner link - http://www.piriform.com/ccleaner
    

Windows should reinstall the drive when the computer boots back up.

If this does not resolve your problem, try the following.

• Download one of the Open Source DVD burning programs from the links below
  http://infrarecorder.org/
  

• http://www.techmixer.com/free-disc-burning-software-cdrtfe/
  

• The following link is a list of all free, but not all Open Source, Windows DVD burning software.
  http://www.techmixer.com/free-windows-cd-dvd-burner-software-list-download/
  

If you take all these step and you still can not burn a DVD, chances are your DVD burner componet needs to be replaced. Good Luck.

• If this helps resolve your issue, would you please rate the solution
  

I find in one of the Cable compny the pinout configuration and the EIDE pinout configuration.
to boulit a cable is very simple if you have all the data.
AnyWay Thank you

Azi

use standard,...

the only advice is that click on Start, right click on My Computer, click on Proporties, click on the Hardware tab on the System Properties, click on Device Manager, click on the DVD/CD-ROM drives if its there. if its not there, make sure your dvd drive is connected to the USB or plugged in Internally, click on Scan for hardware changes. thats all i can say. i dont really have that drive. i have the GSA-H21N. i am young and i remembered when i accidently did that to the keyboard. so i figured out how to do stuff like this.

You cannot change the region code again after 5 times of changing even if you move it to a new computer or install a new OS on your computer, I recommend buying a new DVD Drive to access full functionability and no restrictions.

I just posted a reply to another message that is almost the same. Could be you. It is the foam pad ring from a new CD or DVD spindle that was stuck on a disc that you put in and missed it. It does not go back in the drive. It goes in the trash.
The ring is used hold the discs solidly on new retail spindle. The noise was the drive strugging with an unbalanced disc.

If you caught it right away and nothing hit the laser or lens you are ok. Try reading or burning another disc.

Cheers

drivers are not needed in order to cd to work, but this problem has aleazrdy been registered.
you shoul click on START, RUN, and type "regedit"
then search in the tree the branch
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
in this, remove the Upperfilters & Lowerfilters values.
reboot, it should work
if really not working after that, download and install the firmware update you can download at http://drivers.softpedia.com/get/FIRMWARE/LG/LG-GSA-H21N-Firmware-A03.shtml

you need to install either some 3rd party software i.e. powerdvd or go to this page and download the dvd decoder for media player http://www.microsoft.com/windows/windowsmedia/player/plugins.aspx

here's how, you have to oppen that computer, take that cd drive out, dismantle it, and personally clean the lens, duat must have collected on the lens for the long years of not usin it, if you are currently online we'll do the dismantling and cleaning together, contact me e-mail: [email protected] mobile phone: +639152192626.

Drive might be dead. Try another drive to eliminate the drive as being the problem. Also try DeepBurn writer software.

Found this,,,,, https://www.justanswer.co.uk/consumer-electronics/c5uh2-hitachi-xl500-won-t-connect-hear-running-no-light.html hope it helps.

use this? it can backup anything. https://www.2brightsparks.com/download-syncbackfree.html

You will have to use the HDMI port on the mac. provided you have a HDMI input in the projector

BENJAMIN, Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

buried in endless spam are you. does it fail on 2nd PC???????????????????????????? but yes, I am the MVP of external HDD< I build my own. Have over 5 here for Backups . lots of causes, for sure bad drive, or missing drivers.. bad HW hardware or BAD software SW. Missing 12vdc 2amp power pack>, lost or using wrong one. when pack above does the HDD spin? usb connected to PC. NO PC stated, NO OS stated, windows/chrome/Linux/android? its at lease 10 years old , see posts back that far. not good old HDD,this old. sold during W7 era. 2009. The drive has 3.5" HDD that needs lots of power (Amps) to start up that big motor inside, and is first thing to learn . 2amps it needs, ok? so if pack is missing it will never startup on any USB port, not rated for 20x standard USB load factors. some laptops only do 0.1amps (100mA) and are useless to startup any hdd motor of any kind. see why here. and see a better extremal solution cheap.! $10 http://www.pcdied.com/external-hdd.html

Tried googling for the answer but couldn't find it. Try calling an it support company, I'm sure they'll help you out for free. Perhaps you can try https://www.computersinthecity.co.uk/, they have been helpful to me in the past.

No. http://www.hitachidigitalmedia.com/en-gb/discontinued-products/plasma-tvs/42-106cm/42pd7200

Hi, What is the router/modem model number? Have you tried a different cable? Have you gone into the menu, networking and setup ?