VIA Epia M10000 Motherboard - Answered Questions & Fixed issues
Epia m10000
pc case internal speaker
if your computer came with a motherboard disc the sound drivers could be on it
click start control panel administrive tools computer management device manager scroll to sound,video and game controllers you might see a yellow question exclamation mark? ! or a red X Right click to reinstall drivers
click start control panel sounds and audio,volume,advanced,speakers make sure you have selected the
(((appropriate speakers))) also audio you will find 3 drop down lists make sure you have the correct settings there
also
click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it
if his does not fix the problem
click start control panel sounds and audio devices you can adjust the volume there also select speaker volume you can change your settings there you can also tick in the box place icon in taskbar for any further volume control settings you will need to right click on the volume icon system select adjust volume
click start control panel sounds and audio,volume,advanced,speakers select the appropriate speakers from the drop down list or navigate to the device manager scroll to system devices + to expand,system speaker right click properties then select use this device (enable) also you might check
the speakers plug/outlet is usually at the back of the computer you will have to open up the computer to check the lead attached to the rear of the input plug make sure the connection is good
try cleaning your computer of dust using a fine air blower from a compressor making VERY sure that there is no MOISTURE in the air line specifically around the sound card and the CPU central processing unit dust causes static to build up in a computer
hope this helps you
if you dont have a motherboard disc you will have to download the drivers
Need Help Resolving Network Connectivity Issues
Phone your Internet Provider that you require their newest Home Hub and engineer to install it and check the cable / phone connections to your home. Tell them the service is terrible and if they don't fix it, you are changing companies. In the last 20 years, I have had 4 upgrades of routers.It is not you or your devices, it is the equipment from your ISP or the cables that supply that service...
Vaddio productionview 999-5700-000, on boot, Control A and Control B both lit, lose camera control
The issue with the Vaddio ProductionVIEW 999-5700-000 where both Control A and Control B lights are on during boot, resulting in a loss of camera control, may be sporadic and hard to recreate intentionally. It could indicate intermittent hardware or firmware issues. To address this:Ensure all connections and cables are secure.Check for any firmware updates or patches provided by Vaddio to address potential bugs.If the problem persists, consider contacting Vaddio's customer support for specific diagnostics and potential solutions, as this issue might require specialized technical expertise.
Hi internet. I am on Windows 10 version 1903 and I decided to install TOCA Race Driver 3 onto my PC. Upon installation, I clicked on the game, and it didn't initially load, so I started it as an administrator. Then I got a yes/no pop up from the game stating my computer needed to restart. After clicking yes, my PC got stuck in an endless cycle of Automatic Repair, so I disabled Automatic Repair via command prompt. Then when I restarted, it said that the driver verification (or something like that) of sfsync03.sys failed, so I then went back into command prompt, and I tried to locate and delete that file, only to see that it was not present in my x:\windows\system32\drivers folder (the drive is x because I am doing this through Windows 10's built-in recovery tool). So now I've started chkdsk /r, but I'm stumped and I need access to my computer. Please, kind internet passerby, do help me! Thank you, Orange.
my guess is this software is infected.
no source stated, URL
and you did not run VIRUSTOTAL.com on the install file first.
you will learn from this mistake.
1: only get games from maker or STEAM
2: run AV virustotal.com free on the installer.
3: set restore point in W10
4: load the game and pray.
or use , REvo uninstaller, and run it and pick Install the game. now it will remove it later if bad..by the roots.
Not finding what you are looking for?