20 Most Recent VIA P4MA Motherboard Questions & Answers


VIA P4MA... | Answered on Sep 21, 2013

please download diver

VIA P4MA... | Answered on Sep 21, 2013

my computer are no sound i lost my own motherboard driver how i can fix it

VIA P4MA... | Answered on Jul 21, 2013

Hello download the driver here:


You need to unzip the file before you install.

Please install the other driver, if any missing.

Here is only drivers for windows xp, and backwards.

Hope this will help you

VIA P4MA... | Answered on Feb 13, 2013

goto this site, it lets you download all your drivers for free. www.driverguide.com

VIA P4MA... | Answered on Nov 20, 2012

lots of ac97driver, try to look at this cmi, realtek

VIA P4MA... | Answered on Nov 09, 2012

Just go here and select your operating system , the driver you need, and the exact motherboard you have to get the proper driver:

VIA P4MA... | Answered on May 24, 2012

Yes it is due to faulty RAM. Try taking it all out and trying one stick at a time untill you locate the bad one

VIA P4MA... | Answered on Apr 06, 2011

if OUND is sound
the beeps are post during post the very first work is done by the ram,all the memory in the ram is first transferred to the hard disk,and remains active untill turned off.
make sure that your RAM is securely seated
test or replace all the leads that attach to your hard drive make sure the connections are secure including electrical extensions + IDE,SATA the ones that attach from your
((motherboard to hard drive))
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty or just replace them they are probably old and faulty ?
hope this helps don

VIA P4MA... | Answered on Mar 11, 2011

Hi, USB issues - Probably the BIOS. Have you checked the BIOS version? VIA P4V845? Also I get the impression that P4V845 have 2 versions, SX & SM, that it is an Intel chipset based mb and not VIA and that it was probably by one of the OEM vendors for Pc Partner. In any case, should you want to flash/update your BIOS, this might be of help to you > http://www.wimsbios.com/phpBB2/topic8315-15.html Good luck and kind regards.

VIA P4MA... | Answered on Dec 15, 2010

control panel sounds and audio,audio make necessary adjustments there or control panel,administrive tools,computer management,device manager,sound,could be a yellow question mark? right click to re-install drivers
good luck

VIA P4MA... | Answered on Sep 11, 2010

there are two jacks in backside panel so please ensure that u plugin both the jacks. red for mike and green for speakers

VIA P4MA... | Answered on Apr 06, 2010

First of all try to disable the onboard sound card.
Enter the bios by pressing "del" or F2 during the boot process, navigate to find sound options and disable the onboard audio. Boot the pc normally, go to the device manager and uninstall any audio drivers. Shut down the pc, unplug the power cord and plug-in your new pci audio card. Start the pc and install the drivers for your new audio card.

In case of a problem or clarification, don't hesitate to post.

Thanks and regards
Please kindly rate this solution

VIA P4MA... | Answered on Mar 04, 2010

make sure ur casing USB port wire is connected with ur motherboard

VIA P4MA... | Answered on Feb 17, 2010

If you need help to fix your computer, we will give it to you, provided that you give us four (4) pieces of information. (1) Manufacturer's or Computer's name; (2) Model name and number; (3) *********** board ID (if you can't find it we can help you do so); (4) the most impotant is number 4 because this is how we get our info. to put into our mathematical prototype. We need in all possible detail what happened just before failure, during the failure and after the failure. Then we have the general position of the failure. When we give you instructions, it is not guesses, but facts. Actually you will have all the glory, because it is you that will fix his own, his proper computer based in our instruction and you following our instruction. My name is Constantin (arzconst is mu nicknmae for Fixya.com)

VIA P4MA... | Answered on Jan 14, 2010

It's still probably caused by the RAM, have it checked. If you can do it yourself, clean the RAM as shown in the image below:
Install it back to the computer and turn it on. If problems persist try another RAM, it may already need replacement.

In case your computer has 2 RAMS installed, clean them both. To test if there is a busted one, install the one then turn on the PC, if it works shut down the PC. Then try the other one, if it works too then it just needs some cleaning. But if not, one of them needs replacement. You can still use your computer with 1 RAM, just don't expect the same performance as having two RAM. Also reset the CMOS of the motherboard. It may also help in the process.

Please reply if this has helped you. Thanks.

VIA P4MA... | Answered on Oct 22, 2009

i need audio driver for p4v845sm

VIA P4MA... | Answered on Oct 21, 2009

Download the drivers by clicking on the underlined text:
On-Board VGA (just in case)

VIA P4MA... | Answered on Oct 04, 2009

The USB connections are in groups of 4 and 5 pins in parallel, with one pin missing at one end. The connector goes on, with its first pin(normally red) at the end that has both pins.

VIA P4MA... | Answered on Sep 29, 2009

Not finding what you are looking for?
VIA P4MA Motherboard Logo

66 questions posted

Ask a Question

Usually answered in minutes!

Top VIA Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers


Level 2 Expert

257 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Are you a VIA Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

VIA Computers & Internet

  • VIA Computers & Internet

Most Popular Question

p4m266 8233 driver

  • Computers & Internet