Question about Chrysler PT Cruiser
skips and revs up any ideas on why? The cam and crank sensors have the same power wire. Go after that one. They also have the same ground, but other sensors connect to it also. So it's not the ground.
Question about Chrysler PT Cruiser
I replaced the camshaft position sensor P0340, now the OBD is reading a PO0016 I just replaced the camshaft sensor, now the OBD is reading PO016 crankshaft sensor. Is this normal? Is this a result of ...
How 2 fix 00 Volvo crank but won't start I wake up n my 2000 Volvo S80 crank but won't start it was driving fine before. You should try going to this web site to view how to replace your crank sensor.
I have 1995 Nissan Maxima. On the crank pulley I have 1995 Nissan Maxima. On the crank pulley there's 2 marks close together and one mark not far from it. Which mark is top dead center? This is my ...
I have a 2004 Chevy Express van and the window stops open at an inch or two and wont go any further. They are manual windows that had an aftermarket power kit added. I have removed the kit and even ...
my 96 Camry no longer starts, unexpected failure, it cranks but wont start. what could be the problem? fuel injection system? also leaking some oil from oil pump. It Could Be A Number of things 1 Fuel
...skips when driving on hiway A crank sensor will usually fail and set a trouble code in the computer. Once the engine starts the ignition gets a signal from the cam sensor and uses the crank sensor as ...
crank the car and it will run fine at first as the car warms the car starts skipping. It skips through all the gears at first but then levels out correctly. while you are driving down the road it will
1994 Cadillac won't accelerate in turns slipping on take off my cadillac was useing alot of gas and skipping before it stop cranking. it act like its about to crank but dont.
Question about Cars & Trucks
Key way for bladehit big rock now it runs but with a miss. Runs about One quarter speed my guess is key on crank is bent. crankshaft is bent, keys do not bend skipped timing or damaged crank
1,827 questions posted
Usually answered in minutes!
1,198 Questions
1,007 Questions
816 Questions
677 Questions
582 Questions