Konica Minolta bizhub 250 All-In-One Laser Printer "offset copy tray copier" Questions

...copy comes out crooked. Can you please help me with this problem? Thanking you in advance, Tangela email address: tangie [email protected] sounds like the fuser is offsetting, i.e old image is ...

...copy comes out as if I put original off to one side but original is on glass correctly What tray are you making copies out of? Does it happen ( the off setting) from every tray and the bypass tray ( ...

...is equipped with an output tray that will offset sort the sets then they will be staggered otherwise they will be in one stack. This machine does not collate while copying. Dah...shame on

...offset cover. What is this?? There is a small cover where your paper exits into the tray. It probably is just ajar and not actuating the switch. Check in the area above the right side where you would ...

...tray area. You will need a torch or other light source to see into the delivery unit. The unit itself slides back & forth as part of the delivery assembly & is the mechanism that provides the ...

...copy paper and replace it with 24# bond or 60# offset. ( The 24# and 60# are the same weight just different finishes on the surface ). Assuming your paper tray is one that slides in and out, close ...

...tray or the Manual Feed Slot. �� If the paper is not feeding properly, it may be curled. Remove the paper, straighten it and turn over the stack. �� When ...

...Offset error E531 0000 Stapling error E540 0001 Paper surface not detected (standard tray) 0002 Not moved within the specified time (standard tray) 0003 Sensor not reached within 3 seconds (standard ...

...offset and the screen says wrong size paper. We are using 8.5x11 paper for 8.5x11 copies. Check the dial or slider on the side of the cassette tray for size indicator. This will cause jamming and the ...